Nottinghamshire · England
Bath re-enamelling & resurfacing in Bagthorpe, Nottinghamshire
We travel to Bagthorpe for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
Repair or replace in Bagthorpe?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Generally one visit, start to finish
Take a look at our prices page and bath cost comparison.
Bath re-enamelling at your home in Bagthorpe
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a roll-top that’s seen better days and several chips and rust patches, we can generally put it right, whatever the material.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Bagthorpe (NG16)
- County
- Nottinghamshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs straight away
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Related advice
Do you need bath re-enamelling in Bagthorpe?
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
The things customers typically mention when they call include:
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
- Several chips and rust patches
- Thin, worn enamel in places
What to look for in a quote
- If travel is included in the price
- What protection goes down before work starts
- How changes to the job are handled
- The length of the guarantee and what it covers
About Bagthorpe
Bagthorpe is about 3 miles north of Eastwood, in Nottinghamshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Bagthorpe is one of 329 places in Nottinghamshire we cover. We work right across the region, from Bagthorpe to Birmingham (about 47 miles away).
Our repair technicians cover all of NG16 and the streets around it. Other places close to Bagthorpe include Westwood (1 mile west), Selston (1 mile north), Brinsley (1 mile south), Jacksdale (1 mile west) and Pye Hill (1 mile west). Larger places within reach include Mansfield (7 miles north-east), Beeston (10 miles south), Carlton (11 miles south-east), Sutton in Ashfield (5 miles north), Hucknall (4 miles south-east) and West Bridgford (12 miles south-east).
Near you in Bagthorpe
Typical jobs here are in homes near Bagthorpe Primary School, Selston Arts and Community College and Church of St. Michael and All Angels and the streets around them. Bagthorpe’s nearest station is Langley Mill station, about 3 miles south of the centre. Well-known places in the area include Ashfield Community Hospital (3.8 miles north-east) and Designer Outlet East Midlands (3.3 miles north).
What affects the price in Bagthorpe
Prices start from £350. We price every job individually, from your photos. The main factors are:
- The size and number of damaged areas
- The colour and finish to match
- The material
- Whether we combine several jobs
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- Any details about the material
- Your postcode, so we can check dates
- One picture of the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Also in Bagthorpe
FAQs for Bagthorpe
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
About our accreditations · Every repair comes with a one-year guarantee.
