Doncaster · England
Bath Re-enamelling in Balby
Bath re-enamelling in and around Balby: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
Bath re-enamelling in Balby without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include a coating lifting around the plughole and an original cast iron bath that needs restoring, in Victorian roll-tops, pressed steel baths and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Balby (DN4)
- Area hub
- Doncaster
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Balby. The price reflects:
- How many areas need work
- Any earlier repairs that need removing first
- What the surface is made of
- Where the damage is and how we get to it
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A photo taken from further back
- Something in shot to show the size
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Questions from Balby
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Do you cover the whole of Doncaster?
We work UK-wide, and that includes Balby. Our prices are the same everywhere.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
When we’d advise against a repair
It helps to know what we can’t do too:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About Balby
Balby is about 2 miles south-west of Doncaster, in Doncaster. Jobs in Balby are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Balby is one of 89 places in Doncaster we cover. Our nearest city page is Leeds, about 27 miles away.
Postcode districts we cover here: DN4. Whether you live on Low Road, High Road and May Avenue or a nearby road, a technician can come to you. We also cover the places around Balby: Hexthorpe (1 mile north), Intake (1 mile north-east), Wheatley Hills (1 mile north-east), Sprotbrough (1 mile north-west) and Doncaster (2 miles north-east). Within a short drive, we also cover Adwick le Street (5 miles north), Thorne (11 miles north-east), Conisbrough (4 miles south-west), Bentley (3 miles north), Armthorpe (5 miles north-east) and New Rossington (4 miles south-east).
What’s near Balby
Our customers here include homes close to Potteric Carr, Woodfield Primary School and Danum Gallery, among other places. Other local landmarks include Balby Carr Community Sports College (0.6 miles south-east), St John the Evangelist (under half a mile north-east) and White Swan pub (within half a mile north-east). The closest station to Balby is Doncaster station, about 1.3 miles north-east of the centre. Well-known places in the area include Ashworth Barracks Museum (0.7 miles south-west) and Conisbrough Castle (3.3 miles south-west). Open spaces near Balby include Highfields Lake and Potteric Carr Nature Reserve.
How it works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Let us know about parking or access
How to get a price
Upload photos of the damage and a wider shot of the whole item, with your DN4 postcode, and we will come back with a fixed quote.
Related advice
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What we are called out for in Balby
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
It’s worth getting a quote if you see:
- A roll-top that’s seen better days
- An old resurfacing that’s failing
- An outdated colour you’d like to change
- Stains that will not shift
Questions to ask before you book
- Whether the price covers travel
- Whether they match the colour on site
- What prep work is covered
- How to look after the finish
Landlord and trade work in Balby
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Places near Balby
What else we do in Balby
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Balby
- CHAS and Constructionline accredited
- A year’s guarantee on all work
- Work done at your home or business
- Dust sheets down, tidy finish
Take a look at our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
