Stoke-on-Trent · England
Bath Re-enamelling in Ball Green
Full bath re-enamelling and resurfacing for homes and businesses in Ball Green and across Stoke-on-Trent. Free, fixed quotes from your photos.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
What we can’t put right
We’ll always be straight with you, so here’s what a repair will not do:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
How we handle bath re-enamelling in Ball Green
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. There’s no removal, plumbing or tiling involved. Our technicians work on acrylic baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about an old resurfacing that’s failing and a bath that stays dull however much you clean it.
Every job is backed for twelve months in Ball Green and everywhere else. We return to put right any problem with the work.
- Where
- Ball Green (ST6, ST2)
- County
- Stoke-on-Trent
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How to look after the repair
Simple care helps the repair last. Our advice:
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Avoid suction-cup mats
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Also near Ball Green
Other services in Ball Green
Common problems we fix in Ball Green
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we are called about are:
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Questions to ask before booking
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- Who will actually do the work
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Open a window if you can
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Ball Green and nearby
Ball Green is about 2 miles north-east of Burslem, in Stoke-on-Trent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 59 towns and villages across Stoke-on-Trent. Our jobs stretch from Ball Green to Manchester (about 29 miles away).
Our visits in ST6 and ST2 work the same way as everywhere else we cover. Jobs here include addresses on Norton Lane, Intake Road and Flatts Road and the roads around them. Neighbouring places we cover include Norton le Moors (1 mile west), Ford Green (1 mile south-west), Smallthorne (1 mile south-west), Milton (1 mile south-east) and Baddeley Green (1 mile east). Further out, we also cover Stoke-on-Trent (3 miles south), Hanley (3 miles south), Stoke-upon-Trent (4 miles south), Fenton (4 miles south), Dimsdale (3 miles south-west) and Porthill (3 miles south-west).
Landmarks near Ball Green
Locally, our jobs take us to homes close to Church of St Bartholomew, Norton-Le-Moors Primary Academy and The Excel Academy, among other places. Ball Green’s nearest station is Longport station, roughly 2.7 miles south-west. Well-known places in the area include Moorcroft Museum (1.7 miles south-west) and Smallthorne Urban District (1.1 miles south-west). Not far away are Westport Lake and Bignall Hill.
Landlord and trade work in Ball Green
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Repair or replace in Ball Green?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Ball Green. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Ball Green
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Honest advice, even when it means no job
See our pricing and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Ball Green questions
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How much does bath re-enamelling cost in Ball Green?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item with your ST6 postcode.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
About our accreditations · Every repair comes with a one-year guarantee.
