Stoke-on-Trent · England
Bath Re-enamelling in Stoke-upon-Trent
Fixed-price bath re-enamelling in Stoke-upon-Trent and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
Repairing versus replacing in Stoke-upon-Trent
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Stoke-upon-Trent. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Colour-matched on site
- No extra charge for your area
- Every repair guaranteed for a year
- Work done at your home or business
Read our full price list or resurfacing vs replacement cost guide.
Bath re-enamelling in Stoke-upon-Trent, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include an old resurfacing that’s failing and a coloured bath you want in white, on basins & shower trays, pressed steel baths and cast iron baths.
Big or small, it’s backed by a one-year guarantee in Stoke-upon-Trent and across Stoke-on-Trent.
- Location
- Stoke-upon-Trent (ST4, ST1, ST12)
- County
- Stoke-on-Trent
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Simple care helps the repair last. Our advice:
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- A bath that is rusted through
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Landlords, agents and businesses in Stoke-upon-Trent
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Landlords, letting agents and housing providers in Stoke-upon-Trent use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Keep pets and children out of the room while we work
- Open a window if you can
- Mention if the room is upstairs or in a flat
Get a quote
To get a price, send two or three photos using our quote form or ring us. We’ll say right away if a repair is the right fix.
Advice
Towns and villages near Stoke-upon-Trent
Also in Stoke-upon-Trent
FAQs for Stoke-upon-Trent
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How do I get a price for bath re-enamelling in Stoke-upon-Trent?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your ST4 postcode.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so mention it when you send pictures.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Covering Stoke-upon-Trent
Stoke-upon-Trent is about 1 mile south-west of Stoke-on-Trent, in Stoke-on-Trent. Customers in Stoke-upon-Trent get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We cover 59 places across Stoke-on-Trent. We work right across the region, from Stoke-upon-Trent to Manchester (32 miles away).
Postcode districts we cover here: ST4, ST1 and ST12. Streets in the area include City Road, Lodge Road and Grice Road. You’ll find Stoke-upon-Trent on the A52 and A5006, which makes it straightforward to reach. We also cover the places around Stoke-upon-Trent: Penkhull (1 mile south-west), Shelton (1 mile north-east), Etruria (1 mile north-west), Stoke-on-Trent (1 mile north-east) and Hanley (1 mile north-east). Further out, we also cover Tunstall (4 miles north), Smallthorne (3 miles north), Porthill (3 miles north-west), Ford Green (3 miles north), Crackley (4 miles north-west) and Sneyd Green (3 miles north). As one of the bigger places in Stoke-on-Trent, Stoke-upon-Trent sees plenty of our work.
Around Stoke-upon-Trent
We visit homes around Stoke-on-Trent College, The Wheatsheaf pub and City of Stoke-on-Trent Sixth Form College, among other places. Other local landmarks include Stoke Minster (within half a mile south-east) and The Willows Primary School (under half a mile south-west). Stoke-upon-Trent has its own railway station: Stoke-On-Trent station. Well-known places in the area include The Potteries Centre (1.5 miles north) and Minton Museum (under half a mile south). Open spaces near Stoke-upon-Trent include Hem Heath Woods and Westport Lake.
- Other local spots include Smallthorne Urban District (2.7 miles north)
Signs you need bath re-enamelling in Stoke-upon-Trent
Hard water speeds up the wear, and abrasive cleaners do the most damage.
People typically call us after spotting something like this:
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- Several chips and rust patches
- A bath in a colour that no longer suits
Questions to ask before you book
- Whether the price covers travel
- What aftercare is recommended
- When it can be used again
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
