Angus · Scotland
Bath re-enamelling & resurfacing in Balmirmer, Angus
Problem with your bath in Balmirmer? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Bath re-enamelling at your home in Balmirmer
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair basins & shower trays, cast iron baths and acrylic baths, and people most frequently call us about a period or roll-top bath worth keeping and stains that won’t shift.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Balmirmer (DD11)
- Area hub
- Angus
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Balmirmer and the surrounding area
Balmirmer is about 3 miles north-east of Carnoustie, in Angus. Our repair technicians come to clients in Balmirmer and the surrounding area, so you do not need to take anything anywhere. Balmirmer is one of 40 places in Angus we cover. You can also see our page for Edinburgh, about 46 miles away.
Postcode districts we cover here: DD11. Neighbouring places we cover include East Haven (2 miles south-east), Panbride (2 miles south), Carlogie (2 miles south-west), West Haven (3 miles south) and Clayholes (3 miles south-west). Larger places within reach include Arbroath (4 miles north-east), Forfar (11 miles north-west), Kirriemuir (15 miles north-west), Brechin (13 miles north), Hunter's Town (3 miles south-west) and Gardynebourg (3 miles south-west).
Around Balmirmer
For rail, the closest station is Carnoustie station, roughly 2.8 miles south of the centre. Well-known places in the area include Arbroath Signal Tower Museum (3.9 miles east) and Panmure Castle (2.2 miles west).
Repairing versus replacing in Balmirmer
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Balmirmer customers choose us
- Colour-matched on site
- No need to remove anything
- Fixed prices from your pictures
- One-year guarantee on every repair
Take a look at our prices page and bath cost comparison.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Towns and villages near Balmirmer
Also in Balmirmer
FAQs for Balmirmer
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Looking after it afterwards
To keep it looking its best for years:
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Wash away dyes and oils after use
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Common problems we fix in Balmirmer
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- A roll-top that’s seen better days
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
What your quote should include
- Whether a trained technician does the job
- How changes to the job are handled
- How the room is protected while they work
- Whether the price is fixed and includes VAT
What affects the price in Balmirmer
Resurfacing from £350. We charge the same across the UK, including Balmirmer. What changes the price is:
- How many areas need work
- What kind of damage it is
- The colour and finish to match
- The material
The price reflects the work involved, not where you live. The full price is agreed before booking.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- A picture taken from further back
- Any earlier repairs or coatings
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
When a repair is not the answer
In fairness, some problems need a different fix:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- A bath split right through the body
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
Get a quote
To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
