Angus · Scotland
Bath re-enamelling & resurfacing in Carlogie, Angus
We travel to Carlogie for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
Bath re-enamelling at your home in Carlogie
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. Our repair technicians work on basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people get in touch are a period or roll-top bath worth keeping and stains that won’t shift.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Carlogie (DD7)
- Region
- Angus
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Carlogie
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Why repair rather than replace?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
- No need to remove anything
Read our pricing and resurfacing vs replacement cost guide.
Places near Carlogie
More services for Carlogie
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair will not do:
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
FAQs for Carlogie
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We’ll confirm timings when we quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do you cover Carlogie?
Yes, we do. We send a technician to Carlogie for every job, and the price is the same as everywhere else.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Carlogie and the surrounding area
Carlogie is about 1 mile north of Carnoustie, in Angus. Anywhere in DD7, a technician comes to you. Carlogie is one of 40 places in Angus we cover. Our nearest city page is Edinburgh, about 44 miles away.
Jobs in DD7 are booked in the same way as anywhere else. From Isla Avenue, Carlogie Farm Road and Prosen Bank or anywhere nearby, we can come to you. Other places close to Carlogie include Clayholes (1 mile south-west), Panbride (1 mile east), Carnoustie (1 mile south), Hunter's Town (1 mile south-west) and West Haven (1 mile south-east). Larger places within reach include Arbroath (6 miles north-east), Forfar (11 miles north-west), Brechin (15 miles north), Letham (8 miles north) and Friockheim (9 miles north).
Near you in Carlogie
Our clients here include homes close to Holyrood Episcopal Church and Carnoustie High School. For rail, the closest station is Carnoustie station, roughly 1 mile south-east. A little further out are Panmure Castle (1.4 miles north-west) and Ashludie Hospital (4.3 miles south-west).
When to call us in Carlogie
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
People typically call us when they notice something like this:
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
Before booking anyone
- How the colour is matched
- How the room is protected while they work
- A fixed price, and whether VAT is included
- Aftercare advice
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The material and finish
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How many areas need work
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
How to get a fixed quote
Phone pictures are fine. Ensure they show:
- Any details about the material
- Details of any past repairs
- One sharp close-up of the damage
- Natural light rather than flash
Most customers in Carlogie get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
