Powys · Wales
Bath Re-enamelling in Banwy
Full bath re-enamelling and resurfacing in Banwy, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Bath re-enamelling in Banwy without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you are dealing with a coating lifting around the plughole and brown or grey marks that don’t clean off, we can help.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Where
- Banwy (SY21)
- Area hub
- Powys
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Banwy
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.
Keep an eye out for these signs:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Stains that will not shift
What to look for in a quote
- What preparation is included
- Whether they match the colour on site
- How your room will be protected
- A fixed quote, and whether VAT is included
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Store bottles off the bath
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How we price bath re-enamelling
Prices start from £350. We price every job individually. The main factors are:
- How many areas need work
- What kind of damage it is
- How many items we do on one visit
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
How to get a fixed price
You can take the photos on your phone. Just make sure we can see:
- The material, if you know it
- A clear, close picture of the problem area
- Something in shot to show the size
- A photo taken from further back
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say right away whether it can be repaired.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Colour mixed on the day to match
- Free fixed quotes from pictures
- Rooms protected and left tidy
- We come to you, anywhere in the UK
Read our pricing and resurfacing vs replacement cost guide.
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
How to get a price
Upload a picture of the damage and a wider shot of the entire item, with your SY21 postcode, and we will come back with a fixed quote.
Read more
Towns and villages near Banwy
Also in Banwy
Banwy and the surrounding area
Banwy is about 16 miles north-west of Y Drenewydd, in Powys. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover all 234 towns and villages in Powys. You can also see our page for Liverpool, about 54 miles away.
We cover every part of SY21. Close by, we cover Foel (2 miles south), Llanerfyl (4 miles south-east), Abertridwr (5 miles north-east), Pentyrch (7 miles south-east) and Dinas Mawddwy (8 miles west). Within a short drive, we also cover Pen-y-Glodfa (15 miles south-east), Bron-y-Buckley (15 miles east), Bryn (15 miles south-east), Cegidfa (15 miles east), Llanfair Caereinion (9 miles south-east) and Llanfyllin (10 miles east).
What’s near Banwy
Our customers here include homes close to Parish Church of St Tydecho and the streets around them. Further afield, we also cover the area around Rhos Domen (1.2 miles south-west). For a walk, there’s Moel y Tryfel and Llyn Coch-hwyad.
Common questions in Banwy
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
How long will the bath be out of use?
Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.
Can you fix a peeling bath coating?
Generally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
