Warwickshire · England
Bath re-enamelling & resurfacing in Barford, Warwickshire
Damaged bath in Barford? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
For landlords and businesses
For anyone letting property in or around Barford, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Bath re-enamelling in Barford without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re frequently asked to fix wear marks under the taps and an outdated colour you’d like to change, across cast iron baths, acrylic baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Barford (CV35)
- Area hub
- Warwickshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Repair dripping taps early
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Questions from Barford
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Are there extra charges for Barford?
Travel is included in the price, and we charge the same wherever you are.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
How much does bath re-enamelling cost in Barford?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Towns and villages near Barford
Also in Barford
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
What we’re called out for in Barford
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
People generally call us after spotting something like this:
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A coating lifting around the plughole
Before you book anyone
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- What aftercare is recommended
How the visit works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Open a window if you can
Get a quote
Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Barford, and we will reply with a fixed quote.
Advice
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Barford and the surrounding area
Barford is about 3 miles south-west of Warwick, in Warwickshire. Whether you’re in the middle of Barford or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Barford is one of 324 places in Warwickshire where we work. Our jobs stretch from Barford to Birmingham (20 miles away).
Our visits in CV35 work the same way as everywhere else we cover. Streets in the area include High Street, Fairfax Close and Elliotts Orchard, and we cover them all. Neighbouring places we cover include Sherbourne (1 mile north-west), Longbridge (1 mile north), Hampton on the Hill (2 miles north-west), Black Hill (2 miles south-west) and Heath End (2 miles west). Larger places within reach include Warwick (3 miles north-east), Royal Leamington Spa (5 miles north-east), Stratford-upon-Avon (6 miles south-west), Leamington Spa (4 miles north-east), Kenilworth (7 miles north) and Southam (9 miles east).
Around Barford
We visit homes around Aylesford School, Barford St Peter's CofE Primary School and Church of St Peter. Barford’s nearest station is Warwick Parkway station, about 2.8 miles north. A little further out are Fulbrook Castle (1.1 miles west) and St Michael's Hospital (3.1 miles north).
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Barford. The price reflects:
- Unusual colours or finishes
- The material
- Whether we combine several jobs
- How many areas need work
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- Any details about the material
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- One picture of the whole bath
If you are in Barford and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Repair or replace in Barford?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
What you get with us
- Dust sheets down, tidy finish
- One visit for most repairs
- Work done at your home or business
- Colours mixed by hand to suit your surface
Take a look at our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
