Warwickshire · England
Bath Re-enamelling in Sherbourne
We travel to Sherbourne for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Bath re-enamelling at your home in Sherbourne
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We’re frequently asked to fix a coating lifting around the plughole and a coloured bath you want in white, on Victorian roll-tops, cast iron baths and acrylic baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Sherbourne (CV35)
- Region
- Warwickshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Sherbourne
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
If you can see any of these, send us a picture:
- Stains that will not shift
- Lots of chips and rust spots
- Thin, worn enamel in places
- A coating lifting around the plughole
What your quote should include
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- How your room will be protected
- What prep work is covered
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When we’d advise against a repair
Some jobs are not right for a repair, including:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- A bath that’s rusted through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Landlord and trade work in Sherbourne
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. Allow a full day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Also near Sherbourne
More services for Sherbourne
Sherbourne and the surrounding area
Sherbourne is about 3 miles south-west of Warwick, in Warwickshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Our repair technicians cover 324 places in Warwickshire, from the larger towns to small villages. We work right across the region, from Sherbourne to Birmingham (about 19 miles away).
Our repair technicians cover all of CV35 and the streets around it. Jobs here include addresses on Church Road, Vicarage Lane and Watery Lane. We also cover the places around Sherbourne: Longbridge (1 mile north-east), Barford (1 mile south-east), Hampton on the Hill (1 mile north), Hampton Magna (2 miles north) and Heath End (2 miles west). We also work in nearby towns such as Warwick (3 miles north-east), Royal Leamington Spa (5 miles north-east), Stratford-upon-Avon (6 miles south-west), Leamington Spa (4 miles north-east), Kenilworth (7 miles north) and Southam (10 miles east).
Local landmarks in Sherbourne
Around Sherbourne, we work in homes near Church of All Saints, Aylesford School and Joseph Arch Public House, among other places. Sherbourne’s nearest station is Warwick Parkway station, roughly 2.2 miles north of the centre. A little further out are Fulbrook Castle (0.9 miles south-west) and Market Hall Museum (2.2 miles north-east).
Repairing versus replacing in Sherbourne
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- Typically one visit, start to finish
- No need to remove anything
- A year’s guarantee on all work
- Honest advice, even when it means no job
Read our full price list or guide to resurfacing and replacement costs.
Sherbourne questions
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
Which areas do you work in?
All of Warwickshire, and the rest of the UK. There’s no extra charge for travel.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Keeping it looking good
To keep it looking its best for years:
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
