Doncaster · England
Bath Re-enamelling for Barnby Dun homes
We travel to Barnby Dun for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Landlords, agents and businesses in Barnby Dun
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Bath re-enamelling in Barnby Dun, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on cast iron baths, acrylic baths and Victorian roll-tops, and the jobs we see most are thin, worn enamel in places and a coating lifting around the plughole.
We stand behind the work with a one-year guarantee.
- Where
- Barnby Dun (DN3)
- County
- Doncaster
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
To keep it looking its best:
- Get any chip repaired quickly
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Barnby Dun. The price comes down to:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- How hard the colour is to match
- What kind of damage it is
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Quotes from your photos
Two or three clear photos are usually enough. Try to include:
- A picture taken from further back
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
What you get with us
- Free fixed quotes from pictures
- Rooms protected and left tidy
- Everything repaired in place
- Every repair guaranteed for a year
Read our full price list or bath cost comparison.
Do you need bath re-enamelling in Barnby Dun?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a picture if you notice any of these:
- A bath in a colour that no longer suits
- Wear marks under the taps
- Staining under the taps and around the waste
- A roll-top that’s seen better days
What to look for in a quote
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Where we work around Barnby Dun
Barnby Dun is about 5 miles north-east of Doncaster, in Doncaster. Whether you are in the middle of Barnby Dun or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 89 towns and villages in Doncaster, from the larger towns to small villages. Our jobs stretch from Barnby Dun to Leeds (about 25 miles away).
Here we cover the DN3 postcode area. Whether you live on High Street, Church Road and Station Road or a nearby road, a technician can come to you. Close by, we cover Kirk Sandall (1 mile south), South Bramwith (1 mile north), Kirk Bramwith (2 miles north), Edenthorpe (2 miles south) and Thorpe in Balne (2 miles north-west). Further out, we also cover Doncaster (5 miles south-west), Adwick le Street (5 miles west), Thorne (5 miles north-east), Conisbrough (9 miles south-west), Bentley (4 miles south-west) and Armthorpe (3 miles south).
Local landmarks in Barnby Dun
Locally, our jobs take us to homes close to Barnby Dun Primary Academy, Church of St Peter and St Paul and Hungerhill School. The nearest railway station is Kirk Sandall station, about 1 mile south. Nearby you’ll also find Hangthwaite (4.5 miles west) and Doncaster Royal Infirmary (3.6 miles south-west). The countryside around Barnby Dun includes Thorpe Marsh Nature Reserve.
Places near Barnby Dun
Other services in Barnby Dun
Questions from Barnby Dun
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Do you cover the entire of Doncaster?
All of Doncaster, and the rest of the UK. Travel is included in the price.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send pictures?
You’ll get a fixed quote back, typically with dates to choose from. There is no obligation to book.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
The process
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. It normally takes the best part of a day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
Get a quote
Most customers in Barnby Dun get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
