Doncaster · England
Bath Re-enamelling for Thorpe in Balne homes
Bath re-enamelling across Thorpe in Balne and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Bath re-enamelling in Thorpe in Balne without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on cast iron baths, acrylic baths and pressed steel baths, and the jobs we see most are wear marks under the taps and several chips and rust patches.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Area
- Thorpe in Balne (DN6)
- Region
- Doncaster
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Where the damage is and how we get to it
- What kind of damage it is
- Whether we combine several jobs
- Previous DIY repairs that have to come out
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- One sharp close-up of the damage
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Repairing versus replacing in Thorpe in Balne
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- We leave the room as we found it
- Most jobs done in one visit
- We will tell you if it’s not worth repairing
- A fixed quote before you book
Take a look at our full price list or guide to resurfacing and replacement costs.
Thorpe in Balne and nearby
Thorpe in Balne is about 4 miles east of Adwick le Street, in Doncaster. Clients in Thorpe in Balne get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We cover all 89 towns and villages across Doncaster. We work right across the region, from Thorpe in Balne to Leeds (24 miles away).
Here we cover the DN6 postcode area. Neighbouring places we cover include Kirk Bramwith (2 miles east), South Bramwith (2 miles east), Barnby Dun (2 miles south-east), Kirk Sandall (2 miles south-east) and Long Sandall (3 miles south). Within a short drive, we also cover Doncaster (5 miles south), Adwick le Street (4 miles west), Thorne (6 miles east), Conisbrough (9 miles south-west), Bentley (4 miles south-west) and Armthorpe (4 miles south-east).
Landmarks near Thorpe in Balne
Thorpe in Balne’s nearest station is Kirk Sandall station, about 2.1 miles south-east of the centre. Well-known places in the area include Doncaster Royal Infirmary (4.2 miles south) and Hangthwaite (3.8 miles south-west). Not far away are Thorpe Marsh Nature Reserve and Highfields Lake.
When we’d advise against a repair
We will not take on work that won’t last, so these are the limits:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
FAQs for Thorpe in Balne
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you repair something that is been repaired before?
Generally, yes. The old repair comes out first.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
How long is the bath unusable?
One day for most baths, ready the next day. We give you timings with the quote.
Also near Thorpe in Balne
More services for Thorpe in Balne
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
What we do, step by step
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Store bottles off the bath
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
