Nottinghamshire · England
Bath Re-enamelling for Barnby Moor homes
Full bath re-enamelling and resurfacing in Barnby Moor, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
Where we work around Barnby Moor
Barnby Moor is about 3 miles north-west of Retford, in Nottinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 329 towns and villages in Nottinghamshire. Our jobs stretch from Barnby Moor to Leeds (39 miles away).
Every address in DN22 is within our area. Jobs here include addresses on Station Road, Rose Meadows and The Coppice and the roads around them. Neighbouring places we cover include Sutton cum Lound (1 mile east), Lound (2 miles north-east), Tiln (2 miles east), Bolham (3 miles east) and Babworth (3 miles south). Further out, we also cover Worksop (6 miles south-west), Mansfield Woodhouse (15 miles south-west), Forest Town (15 miles south-west), Shirebrook (14 miles south-west), Market Warsop (12 miles south-west) and New Ollerton (10 miles south).
Landmarks near Barnby Moor
Typical jobs here are in homes near The Elizabethan Academy, St Bartholomew's Church and The White Horse Inn, among other places. Barnby Moor’s nearest station is Retford station, roughly 3.5 miles south-east of the centre. Other landmarks nearby include Bassetlaw Hospital (5.2 miles south-west). Not far away are Bellmoor Lake and Idle Valley Nature Reserve.
About our bath re-enamelling in Barnby Moor
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair pressed steel baths, basins & shower trays and acrylic baths, and the jobs we see most are an old resurfacing that’s failing and enamel that’s lost its shine and feels rough.
You get a one-year guarantee, the same in Barnby Moor as everywhere else we work.
- Where
- Barnby Moor (DN22)
- Region
- Nottinghamshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
How to care for the repair
To keep it looking its best:
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What we do, step by step
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Open a window if you can
- Clear the area around the damage
- Let us know which floor the room is on
Get a quote
Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Barnby Moor, and we’ll come back with a fixed quote.
Read more
Honest limits
To be straight with you, some problems need a different fix:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What affects the price in Barnby Moor
Prices start from £350. We price every job individually. The main factors are:
- Doing more than one item at once
- The material
- How many areas need work
- Unusual colours or finishes
A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what helps:
- A wider photo showing the entire bath
- Any details about the material
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Questions from Barnby Moor
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
When to call us in Barnby Moor
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Keep an eye out for any of the following:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
What to look for in a quote
- How soon you can use it again
- Who turns up on the day
- How the colour is matched
- Whether the price is fixed and includes VAT
Also in Barnby Moor
Repairing versus replacing in Barnby Moor
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Barnby Moor customers choose us
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- A fixed quote before booking
- Most jobs done in one visit
Take a look at our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
