Worcestershire · England

Bath Re-enamelling for Barnettbrook homes

Fixed-price bath re-enamelling in Barnettbrook and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Barnettbrook?

About our bath re-enamelling in Barnettbrook

When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean, across basins & shower trays, Victorian roll-tops and pressed steel baths.

Big or small, it’s backed by a one-year guarantee.

Area
Barnettbrook (DY10)
County
Worcestershire
Guarantee
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What affects the price in Barnettbrook

Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:

  • What the surface is made of
  • Where the damage is and how we get to it
  • The size and number of damaged areas
  • What kind of damage it is

Our prices are the same across the UK, with no extra for Barnettbrook. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from pictures

You can take the photos on your phone, there is no need for anything special. Just ensure we can see:

  • What it’s made of, if you know
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale

Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Barnettbrook, and we will reply with a fixed price.

How to look after the repair

Nothing complicated is needed:

  • Wipe the bath dry after use in hard water areas
  • Clean with a soft cloth and mild detergent
  • Keep suction mats out of the bath
  • A dripping tap should be fixed promptly

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Your questions about bath re-enamelling in Barnettbrook

Can you redo someone else’s repair?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

Can you re-enamel a roll-top bath?

Yes, often. The inside is resurfaced, and we can refinish the outside as well.

Can you fix a peeling bath coating?

Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

How do I get a price for bath re-enamelling in Barnettbrook?

Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Landlord and trade work in Barnettbrook

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

How the visit works

Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Ensure the room can be ventilated
  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.

Get a free quote

Read more

Should you replace it?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why book with us

  • Every repair guaranteed for a year
  • No need to remove anything
  • Straight answers about what a repair can do
  • We come to you, anywhere in the UK

Read our full price list and resurfacing vs replacement cost guide.

Barnettbrook and the surrounding area

Barnettbrook is about 3 miles east of Kidderminster, in Worcestershire. Whether you are in the middle of Barnettbrook or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Barnettbrook is one of 376 towns and villages in Worcestershire we cover. You can also see our page for Birmingham, about 13 miles away.

We work across DY10. Other places close to Barnettbrook include Hillpool (1 mile south-east), Woodrow (1 mile south-east), Yieldingtree (1 mile north-east), Drayton (1 mile east) and Harvington (1 mile south-west). Larger places within reach include Worcester (13 miles south), Redditch (11 miles south-east), Kidderminster (3 miles west), Bromsgrove (6 miles south-east), Droitwich Spa (9 miles south) and Stourport-on-Severn (6 miles south-west).

Local landmarks in Barnettbrook

The closest station to Barnettbrook is Blakedown station, roughly 1.6 miles north. Nearby you will also find Kidderminster Hospital (3.9 miles west) and Kidderminster Railway Museum (3 miles west). The countryside around Barnettbrook includes Chaddesley Woods National Nature Reserve and Axborough Hill.

Map of Barnettbrook © OpenStreetMap contributors

When a repair is not the answer

Some problems need a builder, plumber or fitter rather than us:

  • A cast iron or steel bath that is cracked right through
  • Leaking taps or wastes (a plumber’s job)
  • Problems we cannot see until an old finish comes off

If in doubt, send photos and we will say what we think.

Materials we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths

Signs you need bath re-enamelling in Barnettbrook

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

Common reasons people in Barnettbrook contact us are:

  • Staining under the taps and around the waste
  • Worn patches where water runs and sits
  • A dull, rough surface that will not come clean
  • A coloured bath you want in white

Before booking anyone

  • What preparation is included
  • Whether a trained technician does the job
  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled

How to compare quotes

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.