Worcestershire · England
Bath re-enamelling & resurfacing in Harvington, Worcestershire
Problem with your bath in Harvington? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Our work in Harvington
Harvington is about 3 miles south-east of Kidderminster, in Worcestershire. Anywhere in DY10, we come to you. We work in 376 places in Worcestershire. Our nearest city page is Birmingham, about 14 miles away.
Every address in DY10 is within our area, from the main roads to the quietest streets. Whether you live on Morton Road and Harvington Hall Lane or anywhere nearby, a technician can come to you. We also travel to Mustow Green (1 mile south-west), Woodrow (1 mile east), Brockencote (1 mile south-east), Barnettbrook (1 mile north-east) and Chaddesley Corbett (1 mile east). Within a short drive, we also cover Worcester (12 miles south), Redditch (12 miles south-east), Kidderminster (3 miles north-west), Bromsgrove (6 miles south-east), Droitwich Spa (8 miles south) and Stourport-on-Severn (5 miles south-west).
What’s near Harvington
Our clients here include homes close to King Charles I School, Church of St Mary (Roman Catholic) and The Plough pub and the streets around them. The closest station to Harvington is Kidderminster station, about 2.4 miles north-west of the centre. Well-known places in the area include Kidderminster Hospital (3.3 miles west) and Caldwall Castle (2.8 miles west). Not far away are Chaddesley Woods National Nature Reserve and Axborough Hill.
How we handle bath re-enamelling in Harvington
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our technicians work on pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are thin, worn enamel in places and a peeling or bubbling previous coating.
Every repair is covered by a one-year guarantee.
- Location
- Harvington (DY10)
- Region
- Worcestershire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Harvington: your questions answered
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Do you cover Harvington?
Yes. We cover the whole UK and travel to Harvington and the rest of Worcestershire. Send photos and we’ll quote, or call 0345 017 0787.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What areas do you cover?
We cover the entire UK, including Harvington and the rest of Worcestershire. Send your postcode with your photos and we will confirm dates.
How it works
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Ensure the area is dry
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
Common problems we fix in Harvington
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted any of these:
- Brown or grey marks that don’t clean off
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- Wear marks under the taps
Questions to ask before booking
- Who turns up on the day
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- How changes to the job are handled
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- What the surface is made of
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
Getting a price from photos
You can take the photos on your phone. Just ensure we can see:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Any details about the material
- A wider photo showing the whole bath
Most customers in Harvington get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Nearby places to Harvington
What else we do in Harvington
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Respect the curing time we give you
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Landlord and trade work in Harvington
For anyone letting property in or around Harvington, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
We work for landlords, letting agents and housing providers in Harvington as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
What we can’t put right
Before booking, it’s worth knowing the limits:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
