Worcestershire · England
Bath Re-enamelling for Hillpool homes
Bath re-enamelling in Hillpool without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Stains that won’t shift
- Chips and rust in more than one place
About our bath re-enamelling in Hillpool
We do not move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. If you are dealing with lots of chips and rust spots and thin, worn enamel in places, we can usually put it right.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Hillpool (DY10)
- County
- Worcestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Hillpool?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- Stains that will not shift
- A peeling or bubbling previous coating
Before booking anyone
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- How soon you can use it again
- Whether a trained technician does the job
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Nearby places to Hillpool
Also in Hillpool
Hillpool questions
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How much does bath re-enamelling cost in Hillpool?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you cover the whole of Worcestershire?
We work UK-wide. Prices do not change with location.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Hillpool. The price reflects:
- How many items we do on one visit
- How many areas need work
- Unusual colours or finishes
- The type of damage
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Good photos mean an accurate price. Here’s what helps:
- Any details about the material
- Something in shot to show the size
- Where you are, by postcode
- A wider photo showing the entire bath
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
About Hillpool
Hillpool is about 4 miles east of Kidderminster, in Worcestershire. Customers in Hillpool get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Hillpool is one of 376 towns and villages in Worcestershire where we work. Our nearest city page is Birmingham, about 13 miles away.
Every address in DY10 is within our area, from the main roads to the quietest streets. Other places close to Hillpool include Woodrow (1 mile south-west), Barnettbrook (1 mile north-west), Drayton (1 mile east), Bluntington (1 mile south) and Tanwood (1 mile south-east). We also work in nearby towns such as Worcester (13 miles south), Redditch (11 miles south-east), Kidderminster (4 miles west), Bromsgrove (5 miles south-east), Droitwich Spa (8 miles south) and Stourport-on-Severn (6 miles south-west).
What’s near Hillpool
Our clients here include homes close to The Robin Hood pub and the streets around them. Hillpool’s nearest station is Blakedown station, about 2 miles north-west of the centre. Further afield, we also cover the area around Kidderminster Hospital (4.4 miles west) and Clent Castle (3 miles north-east). Not far away are Chaddesley Woods National Nature Reserve and Axborough Hill.
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Related advice
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Hillpool clients choose us
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- Normally one visit, start to finish
- Repair technicians who travel to you, UK-wide
Read our pricing and resurfacing vs replacement cost guide.
Honest limits
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Landlords, agents and businesses in Hillpool
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
