Angus · Scotland
Bath re-enamelling & resurfacing in Barry, Angus
Damaged bath in Barry? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that won’t come clean
How we handle bath re-enamelling in Barry
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with a roll-top that’s seen better days and a peeling or bubbling previous coating, we can help, on Victorian roll-tops, acrylic baths and pressed steel baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Barry (DD7)
- Region
- Angus
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Barry
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What areas do you cover?
All of Angus, and the rest of the UK. There is no extra charge for travel.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we will ask for another angle.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
What we’re called out for in Barry
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- A coloured bath you want in white
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
Comparing quotes
- How the colour is matched
- If travel is included in the price
- How long the guarantee is and what it covers
- When it can be used again
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- How many areas need work
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Quotes from your photos
Two or three clear pictures are generally enough. Try to include:
- Where you are, by postcode
- Natural light rather than flash
- A close-up of the damage, in focus
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Landlord and trade work in Barry
If you manage property in Barry, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Open a window if you can
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Getting a price
If you’re in Barry and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Nearby places to Barry
What else we do in Barry
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
When we’d advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
- A bath that is rusted through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Repairing versus replacing in Barry
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing usually wins. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why book with us
- CHAS and Constructionline accredited
- Colour-matched on site
- No need to remove anything
- We’ll tell you if it’s not worth repairing
See our pricing or guide to resurfacing and replacement costs.
Covering Barry
Barry is about 5 miles east of Broughty Ferry, in Angus. We travel to customers in Barry and nearby villages, so you do not need to take anything anywhere. We cover all 40 towns and villages across Angus, from the larger towns to small villages. We work right across the region, from Barry to Edinburgh (about 42 miles away).
All of DD7 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Main Street, Station Road and Knowes Loan and the roads around them. We also cover the places around Barry: Gardynebourg (1 mile east), Hunter's Town (1 mile east), Clayholes (1 mile north-east), Carnoustie (1 mile east) and Carlogie (2 miles north-east). Within a short drive, we also cover Arbroath (8 miles north-east), Forfar (11 miles north-west), Kirriemuir (15 miles north-west), Letham (9 miles north) and Friockheim (10 miles north).
What’s near Barry
We visit homes around Barry and Carnoustie High School, among other places. The nearest railway station is Barry Links station, roughly 0.6 miles south-east of the centre. A little further out are Ashludie Hospital (2.6 miles west) and Ardestie Castle (1.9 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
