Leicestershire · England
Bath Re-enamelling in Barton in the Beans
Bath re-enamelling in Barton in the Beans without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Bath re-enamelling at your home in Barton in the Beans
We do not move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are chips and rust in more than one place and worn patches where water runs and sits.
All our work is covered by our one-year guarantee, wherever you are in Leicestershire.
- Where
- Barton in the Beans (CV13)
- Region
- Leicestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Barton in the Beans
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do you cover the whole of Leicestershire?
The entire UK, including all of Leicestershire. Send your postcode with your pictures and we’ll offer you dates.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we’ll plan for it.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Repair or replace in Barton in the Beans?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Prices start from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Barton in the Beans clients choose us
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- Rooms protected and left tidy
Read our full price list and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Barton in the Beans
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Look out for any of the following:
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Questions to ask before you book
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
- Is the price fixed, and does it include VAT?
- When it can be used again
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Point us to the nearest place to park
- Open a window if you can
- Mention any parking restrictions or tricky access
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Read more
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What affects the price in Barton in the Beans
Resurfacing from £350. You will know the full cost before you book. We take into account:
- What the surface is made of
- The colour and finish to match
- The size and number of damaged areas
- Previous DIY repairs that have to come out
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Send pictures for a quote
Phone photos are fine. Make sure they show:
- A wider photo showing the whole bath
- Where you are, by postcode
- The material, if you know it
- Good light, ideally daylight, without flash glare
For a price in Barton in the Beans, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Towns and villages near Barton in the Beans
Other services in Barton in the Beans
What we can’t put right
Some jobs are not right for a repair, including:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Landlords, agents and businesses in Barton in the Beans
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Our work in Barton in the Beans
Barton in the Beans is about 5 miles south-west of Coalville, in Leicestershire. Our repair technicians come to homes and businesses in Barton in the Beans and nearby villages, so nothing has to leave your home. Barton in the Beans is one of 287 towns and villages in Leicestershire where we work. We work right across the region, from Barton in the Beans to Birmingham (24 miles away).
Here we cover the CV13 postcode area. Whether you live on Main Street, Barton Court and Odstone Road or anywhere nearby, a technician can come to you. If you are just outside Barton in the Beans, we cover Bufton (1 mile south), Carlton (1 mile south), Odstone (1 mile north), Shackerstone (2 miles west) and Congerstone (2 miles west). Further out, we also cover Loughborough (11 miles north-east), Hinckley (8 miles south), Wigston (14 miles east), Coalville (5 miles north-east), Ashby-de-la-Zouch (7 miles north-west) and Shepshed (9 miles north-east).
What’s near Barton in the Beans
Our clients here include homes close to Church of St Andrew and The Market Bosworth School, among other places. A little further out are Shackerstone railway station (1.3 miles west). The countryside around Barton in the Beans includes Ambion Hill.
About our accreditations · Every repair comes with a one-year guarantee.
