Leicestershire · England
Bath Re-enamelling in Bufton
Full bath re-enamelling and resurfacing for homes and businesses in Bufton and across Leicestershire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that’s seen better days
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and typically a day. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why Bufton customers choose us
- One visit for most repairs
- Colour-matched on site
- A year’s guarantee on all work
- No extra charge for your area
See our prices page and resurfacing vs replacement cost guide.
Bath re-enamelling in Bufton without replacing anything
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, and can be used again the next day. If you are dealing with a dull, rough surface that won’t come clean and chips and rust in more than one place, we can usually put it right.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Bufton (CV13)
- County
- Leicestershire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Bufton questions
How much does bath re-enamelling cost in Bufton?
Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
Do you work in Bufton?
Yes, we do. We send a technician to Bufton for every job, and the price is the same as everywhere else.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Where we work around Bufton
Bufton is about 5 miles south of Coalville, in Leicestershire. From the centre of Bufton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 287 towns and villages across Leicestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 24 miles away.
We cover every part of CV13 and the streets around it. We regularly work on streets such as Main Street, Odstone Road and Nailstone Road. We also cover the places around Bufton: Barton in the Beans (1 mile north), Carlton (1 mile south), Odstone (2 miles north), Shackerstone (2 miles west) and Market Bosworth (2 miles south). Within a short drive, we also cover Loughborough (12 miles north-east), Hinckley (8 miles south), Wigston (13 miles east), Coalville (5 miles north), Ashby-de-la-Zouch (7 miles north) and Shepshed (10 miles north-east).
Near you in Bufton
In Bufton, that means homes near The Market Bosworth School and Church of St Andrew. Other landmarks nearby include Shackerstone railway station (1.4 miles west). Open spaces near Bufton include Ambion Hill.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- What the surface is made of
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
Two or three clear pictures are usually enough. Try to include:
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Other services in Bufton
The process
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes the best part of a day in most cases. We leave the room clean and you will know when it can be used.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Advice
When a repair isn’t the answer
A repair is not right for every job, including:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
What we’re called out for in Bufton
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- Stains that won’t shift
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
- Several chips and rust patches
What your quote should include
- How to care for the finish
- How soon you can use it again
- What happens if they find more damage
- The length of the guarantee and what it covers
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
