Leicestershire · England

Bath re-enamelling & resurfacing in Odstone, Leicestershire

Bath re-enamelling in Odstone without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Odstone

Bath re-enamelling at your home in Odstone

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We’re often asked to fix a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, across pressed steel baths, basins & shower trays and acrylic baths.

A one-year guarantee comes as standard.

Technician in a mask working on a freestanding roll-top bath
Where
Odstone (CV13)
Region
Leicestershire
Cover
12 months on all our work
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Why repair rather than replace?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Why Odstone customers choose us

  • One visit for most repairs
  • We come to you, anywhere in the UK
  • Honest advice, even when it means no job
  • Every repair guaranteed for a year

Read our pricing and bath cost comparison.

What bath re-enamelling costs

Prices start from £350. Every quote is fixed and free. What we look at:

  • The colour and finish to match
  • Previous DIY repairs that have to come out
  • Doing more than one item at once
  • The type of damage

We charge the same wherever you are, with no extra for Odstone. The job itself decides the price: the material, the amount of damage and how many items.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • Good light, ideally daylight, without flash glare
  • One picture of the whole bath
  • Your postcode, so we can check dates
  • The material, if you know it

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Materials and what they mean for the repair

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Odstone and nearby

Odstone is about 4 miles south-west of Coalville, in Leicestershire. Wherever you are in the CV13 postcode area, we come to you. Odstone is one of 287 places in Leicestershire we cover. You can also see our page for Birmingham, about 24 miles away.

All of CV13 is covered, from the main roads to the quietest streets. We regularly work on streets such as Newton Lane, Hall Lane and Smithy Lane. Neighbouring places we cover include Barton in the Beans (1 mile south), Shackerstone (1 mile south-west), Bufton (2 miles south), Ibstock (2 miles north-east) and Heather (2 miles north). We also work in nearby towns such as Loughborough (11 miles north-east), Hinckley (9 miles south), Wigston (14 miles south-east), Coalville (4 miles north-east), Ashby-de-la-Zouch (6 miles north-west) and Shepshed (9 miles north-east).

What’s near Odstone

Typical jobs here are in homes near Church of St Denys and Paget Tombs in Churchyard, Sence Valley Forest Park and Ibstock Community College, among other places. Well-known places in the area include Shackerstone railway station (1.3 miles south-west).

Map of Odstone © OpenStreetMap contributors

What we can’t put right

To be straight with you, there are a few things a repair will not fix:

  • Anything hidden under an old coating, until we remove it
  • Steel that has corroded right through
  • A cast iron or steel bath that’s cracked right through

Not sure? Send photos and we will give you a straight answer before you book.

Materials we work on in Odstone

  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Repair dripping taps early
  • Keep suction mats out of the bath
  • Do not leave a chip unrepaired
  • Store bottles off the bath

Wipe the bath dry after use where you can, and rinse off any bath products.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Common questions in Odstone

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How much does bath re-enamelling cost in Odstone?

Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote and the next dates we have.

What happens if you find more damage?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Will the bath be moved?

No. We resurface it in place, so the tiles and taps stay put.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

What we do, step by step

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We tidy up before we leave and let you know when you can use it again.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Make sure the room can be ventilated
  • Mention any parking restrictions or tricky access

How to get a price

Most customers in Odstone get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

Signs you need bath re-enamelling in Odstone

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

It’s worth getting a quote if you see:

  • An original cast iron bath that needs restoring
  • Thin, worn enamel in places
  • Chips and rust in more than one place
  • A bath that stays dull however much you clean it

What your quote should include

  • Who will actually do the work
  • What aftercare is recommended
  • Whether cleaning and preparation are in the price
  • What protection goes down before work starts

Our hiring checklist

Work for landlords and builders

We work for landlords, letting agents and housing providers in Odstone as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.