Staffordshire · England

Bath Re-enamelling in Baswich

Full bath re-enamelling and resurfacing for homes and businesses in Baswich and across Staffordshire. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Baswich

Bath re-enamelling in Baswich without replacing anything

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a coating lifting around the plughole and a period or roll-top bath worth keeping.

Every repair comes with our one-year guarantee, wherever you are in Staffordshire.

Area
Baswich (ST17, ST18, ST16)
Area hub
Staffordshire
Guarantee
One year on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

How we price bath re-enamelling

Prices start from £350. A fixed quote means you know the cost before booking. We look at:

  • Where the damage is and how we get to it
  • Whether we combine several jobs
  • Any earlier repairs that need removing first
  • The colour and finish to match

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Send photos for a quote

You can typically get a fixed price without us visiting. To make it quick:

  • The material, if you know it
  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • A wider photo showing the entire bath

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Baswich and nearby

Baswich is about 1 mile south-east of Stafford, in Staffordshire. Wherever you are in the ST17 postcode area, a technician comes to you. Baswich is one of 512 places in Staffordshire we cover. Our nearest city page is Birmingham, about 24 miles away.

We cover every part of the ST17, ST18 and ST16 postcode area and the streets around it. Whether you live on Ascot Road, Witney Road and Baswich Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Queensville (1 mile west), Berkswich (1 mile south-east), Walton-on-the-Hill (1 mile south-east), Milford (2 miles east) and Tixall (2 miles east). Larger places within reach include Cannock (7 miles south-east), Lichfield (13 miles south-east), Longton (13 miles north), Rugeley (7 miles south-east), Burntwood (11 miles south-east) and Stone (7 miles north).

Local landmarks in Baswich

Around Baswich, we work in homes near Church of Holy Trinity, Leasowes Primary School and William Salt Library. Also close by are Walton High School (1 mile south-east) and Chetwynd Centre (1.4 miles west). The nearest railway station is Stafford station, about 1.6 miles west of the centre. Well-known places in the area include The Staffordshire Police Museum (0.6 miles south) and Stafford Hospital (1.1 miles north-west). Green spaces nearby include Tixall Wide and Radford Meadows.

Map of Baswich © OpenStreetMap contributors

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • Steel that has corroded right through
  • A metal bath with a through crack
  • An acrylic bath that flexes badly underfoot

Not sure? Send photos and we will give you a straight answer before you book.

Materials we work on in Baswich

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

For landlords and businesses

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We are used to working with agents and managing companies. Send the address, photos and access details.

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Wipe the bath dry after use in hard water areas
  • Never use suction bath mats
  • Do not let dyes or oils sit on the finish
  • Clean with a soft cloth and mild detergent

Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

How the visit works

We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day. We leave the room clean and you’ll know when it can be used.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Let us know about parking or access
  • Mention if the room is upstairs or in a flat

Get a quote

The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say straight away whether it can be repaired.

Get a fixed quote

Read more

Baswich questions

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Can I add another job to the visit?

Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

What information do you need?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Common problems we fix in Baswich

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

Signs it’s time to call us include:

  • A coloured bath you want in white
  • A bath that stays dull however much you clean it
  • A roll-top that’s seen better days
  • Wear marks under the taps

Comparing quotes

  • If travel is included in the price
  • Whether the colour is mixed to match
  • When it can be used again
  • What prep work is covered

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.