Staffordshire · England
Bath Re-enamelling in Berkswich
Bath re-enamelling in and around Berkswich: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Berkswich
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Bath re-enamelling at your home in Berkswich
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a bath that stays dull however much you clean it and brown or grey marks that don’t clean off, we can help.
All our work comes with our one-year guarantee, wherever you are in Staffordshire.
- Where
- Berkswich (ST17)
- Area hub
- Staffordshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Berkswich
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote and the next dates we have.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How much does bath re-enamelling cost in Berkswich?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can a failed resurfacing be redone?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What affects the price in Berkswich
Prices start from £350. You will know the full cost before you book. We look at:
- The material and finish
- How much damage there is
- Unusual colours or finishes
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- What it’s made of, if you know
- Something in shot to show the size
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Covering Berkswich
Berkswich is about 2 miles south-east of Stafford, in Staffordshire. Wherever you are in the ST17 postcode area, a technician comes to you. Our repair technicians cover all 512 towns and villages in Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 23 miles away.
Our repair technicians cover all of the ST17 postcode area. We regularly work on streets such as Oak Avenue, Elm Avenue and Brean Road. Close by, we cover Walton-on-the-Hill (1 mile south-east), Baswich (1 mile north-west), Queensville (1 mile west), Milford (1 mile east) and Brocton (1 mile south-east). We also work in nearby towns such as Cannock (7 miles south), Lichfield (13 miles south-east), Longton (14 miles north), Rugeley (6 miles east), Burntwood (10 miles south-east) and Stone (8 miles north-west).
Near you in Berkswich
Locally, our jobs take us to homes close to Leasowes Primary School, St Thomas' Church Walton and Walton High School and the streets around them. Berkswich’s nearest station is Stafford station, about 2.4 miles north-west of the centre. Well-known places in the area include Stafford Castle (3.3 miles west) and Stafford Hospital (1.9 miles north-west). Not far away are Tixall Wide and Radford Meadows.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How it works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a full day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
- Open a window if you can
Getting a price
To get a price, send a couple of photos through our quote form or call us. We’ll say immediately whether it can be repaired.
Read more
Looking after it afterwards
Looking after the surface is easy:
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Towns and villages near Berkswich
More services for Berkswich
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
- Same prices wherever you are
Take a look at our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
