Shropshire · England
Bath re-enamelling & resurfacing in Battlefield, Shropshire
Bath re-enamelling across Battlefield and nearby, usually in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that won’t shift
Honest limits
Before you book, it’s worth knowing the limits:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Bath re-enamelling at your home in Battlefield
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for wear marks under the taps and several chips and rust patches, in acrylic baths, pressed steel baths and Victorian roll-tops.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Battlefield (SY1, SY4)
- Area hub
- Shropshire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Battlefield
What else we do in Battlefield
About Battlefield
Battlefield is about 3 miles north-east of Shrewsbury, in Shropshire. Jobs in Battlefield are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in all 433 towns and villages in Shropshire. Our jobs stretch from Battlefield to Birmingham (40 miles away).
We cover every part of the SY1 and SY4 postcode area. Whether you live on Lancer Road, Sallet Grove and Mayfield Close or anywhere nearby, we can come to you. If you’re just outside Battlefield, we cover Harlescott (1 mile south), Upper Battlefield (1 mile north), Sundorne (1 mile south), Albrighton (1 mile west) and Heathgates (2 miles south-west). Larger places within reach include Shrewsbury (3 miles south-west), Madeley (14 miles south-east), Market Drayton (14 miles north-east), Coleham (3 miles south), Kingsland (3 miles south-west) and Whitchurch (15 miles north).
What’s near Battlefield
Locally, our jobs take us to homes close to Greenacres Primary School, St Mary Magdalene's Church and Shrewsbury Academy and the streets around them. For rail, the closest station is Shrewsbury station, about 2.8 miles south-west. Further afield, we also cover the area around Rowleys House Museum (3.1 miles south-west) and Shrewsbury Castle (2.9 miles south-west). Open spaces near Battlefield include Haughmond Hill.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
When to call us in Battlefield
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Common reasons people in Battlefield contact us include:
- A peeling or bubbling previous coating
- Wear marks under the taps
- An outdated colour you’d like to change
- Stains that will not shift
Comparing quotes
- How the colour is matched
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- How long it needs to cure
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- We leave the room as we found it
- Same prices wherever you are
- CHAS and Constructionline accredited
- Most jobs done in one visit
Take a look at our pricing or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Aftercare tips
Once the work has cured, treat it gently:
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Your questions about bath re-enamelling in Battlefield
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How much does bath re-enamelling cost in Battlefield?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know which floor the room is on
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Ask for a price
Send us a photo of the damage and a wider shot of the whole item, with your SY1 postcode, and we’ll come back with a fixed quote.
Related advice
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before you book. We take into account:
- The colour and finish to match
- The size and number of damaged areas
- How many items we do on one visit
- Whether old repairs or coatings need taking off
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
Most quotes are done from photos alone. To help us price it:
- Natural light rather than flash
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- A photo taken from further back
To get a price, send two or three pictures using our quote form or call us. We will say straight away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
