Northumberland · England
Bath Re-enamelling for Beadnell homes
Our repair technicians come to Beadnell for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
What we do, step by step
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. It normally takes a full day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
How to prepare
- Open a window if you can
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
Ask for a price
For a price in Beadnell, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Bath re-enamelling at your home in Beadnell
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a coloured bath you want in white and brown or grey marks that don’t clean off, we can help, whatever the material.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Beadnell (NE67)
- County
- Northumberland
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Beadnell
What else we do in Beadnell
Questions from Beadnell
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Do you work in Beadnell?
Yes, we do. Repair technicians travel to Beadnell from across the region, with no extra charge for travel.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Beadnell and nearby
Beadnell is about 21 miles south-east of Berwick-upon-Tweed, in Northumberland. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 189 places in Northumberland, from the larger towns to small villages. We work right across the region, from Beadnell to Newcastle upon Tyne (about 39 miles away).
Postcode districts we cover here: NE67. Jobs here include addresses on Longstone Park, Dixon Place and Meadow Lane. We also travel to Benthall (1 mile south-east), Seahouses (2 miles north-west), North Sunderland (2 miles north-west), High Newton-by-the-Sea (2 miles south) and Low Newton-by-the-Sea (3 miles south). We also work in nearby towns such as Alnwick (10 miles south), Wooler (15 miles west), Belford (8 miles west), Warkworth (15 miles south), Longhoughton (9 miles south) and Shilbottle (13 miles south).
Near you in Beadnell
Typical jobs here are in homes near Beadnell Tower Hotel and Church of St Ebba and the streets around them. The nearest railway station is Chathill station, roughly 3.2 miles south-west of the centre. Further afield, we also cover the area around Bamburgh Castle (4.8 miles north-west).
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Landlords, agents and businesses in Beadnell
Landlords, letting agents and housing providers in Beadnell use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The colour and finish to match
- The type of damage
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- A photo taken from further back
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why us?
- Normally one visit, start to finish
- Rooms protected and left tidy
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
