Northumberland · England
Bath Re-enamelling in Shilbottle
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Shilbottle. Send photos for a free, fixed quote.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coloured bath you want in white
How we handle bath re-enamelling in Shilbottle
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. If you’re dealing with chips and rust in more than one place and staining under the taps and around the waste, we can usually put it right, on acrylic baths, pressed steel baths and cast iron baths alike.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Shilbottle (NE66)
- County
- Northumberland
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
It helps to know what we cannot do:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Also in Shilbottle
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before booking.
Why choose Surface Doctor in Shilbottle
- We come to you, anywhere in the UK
- Same prices wherever you are
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
See our pricing or bath cost comparison.
Shilbottle and the surrounding area
Shilbottle is about 14 miles north of Ashington, in Northumberland. We travel to customers in Shilbottle and nearby villages, so nothing has to leave your home. Shilbottle is one of 189 places in Northumberland we cover. Our jobs stretch from Shilbottle to Newcastle upon Tyne (26 miles away).
Postcode districts we cover here: NE66. We regularly work on streets such as Telford Way, Towerburn Gardens and The Haven and the roads around them. Other places close to Shilbottle include Hipsburn (3 miles north-east), Lesbury (3 miles north-east), Alnmouth (3 miles east), Birling (3 miles east) and Warkworth (4 miles south-east). Further out, we also cover Ashington (14 miles south), Morpeth (14 miles south), Alnwick (3 miles north), Amble (5 miles south-east), Newbiggin-by-the-Sea (14 miles south-east) and Stakeford (15 miles south).
What’s near Shilbottle
In Shilbottle, that means homes near Church of St James, Farriers Arms and Shilbottle Primary School, among other places. The nearest railway station is Alnmouth station, about 2.5 miles north-east of the centre. Further afield, we also cover the area around Alnwick Castle (3.2 miles north) and Alnwick Rural District (2.1 miles north).
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take most of the day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Shilbottle questions
Do you cover Shilbottle?
Yes, we do. We send a technician to Shilbottle for every job, with no extra charge for travel.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Landlords, letting agents and housing providers in Shilbottle use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When to call us in Shilbottle
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- Stains that will not shift
- Wear marks under the taps
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Comparing quotes
- What aftercare is recommended
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Shilbottle. The price depends on:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Whether we combine several jobs
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Your postcode, so we can check dates
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
