Lincolnshire · England
Bath Re-enamelling in Belchford
Bath re-enamelling in and around Belchford: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Stains that won’t shift
About our bath re-enamelling in Belchford
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Our repair technicians work on pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are chips and rust in more than one place and thin, worn enamel in places.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Belchford (LN9)
- Area hub
- Lincolnshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What we’re called out for in Belchford
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
These are the problems we are asked about most:
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Comparing quotes
- Aftercare advice
- Who will actually do the work
- What preparation is included
- Whether the colour is mixed to match
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Belchford
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Repairing versus replacing in Belchford
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.
Why Belchford clients choose us
- We will tell you if it’s not worth repairing
- No need to remove anything
- Free fixed quotes from pictures
- Rooms protected and left tidy
Read our full price list and bath cost comparison.
FAQs for Belchford
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you repair something that’s been repaired before?
Typically, yes. We remove the old repair before doing a new one.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Unusual colours or finishes
- What the surface is made of
- Access to the area
- How many items we do on one visit
We charge the same wherever you are, so there is no premium for Belchford. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
We price nearly every job from photos. This is what to send:
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Any details about the material
- Good light, ideally daylight, without flash glare
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Towns and villages near Belchford
What else we do in Belchford
About Belchford
Belchford is about 8 miles south of Louth, in Lincolnshire. From the centre of Belchford to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 732 places across Lincolnshire. Our jobs stretch from Belchford to Leeds (72 miles away).
Every address in LN9 is within our area. Jobs here include addresses on Chapel Lane, Ings Lane and Main Road and the roads around them. Other places close to Belchford include Fulletby (1 mile south), Scamblesby (2 miles north-west), Tetford (2 miles east), Greetham (3 miles south) and High Toynton (4 miles south). Larger places within reach include Louth (8 miles north), Horncastle (4 miles south-west), Mablethorpe (14 miles north-east), Woodhall Spa (10 miles south-west), Sutton on Sea (15 miles east) and Market Rasen (14 miles north-west).
Around Belchford
Around Belchford, we work in homes near The Blue Bell Inn and Church of Saints Peter and Paul. Well-known places in the area include War Memorial Hospital (4.1 miles south-west) and Horncastle (4.3 miles south-west). The countryside around Belchford includes Juicetrump Hill.
How the visit works
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes the best part of a day. We leave the room clean and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
Getting a price
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Belchford, and we’ll come back with a fixed quote.
Related advice
How to look after the repair
Looking after the surface is easy:
- Store bottles off the bath
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
