Lincolnshire · England
Bath re-enamelling & resurfacing in Fulletby, Lincolnshire
Full bath re-enamelling and resurfacing in Fulletby, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Bath re-enamelling in Fulletby, done in place
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We are often asked to fix stains that won’t shift and a bath that stays dull however much you clean it, in Victorian roll-tops, pressed steel baths and cast iron baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Fulletby (LN9)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
For landlords and businesses
Landlords, letting agents and housing providers in Fulletby use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
What affects the price in Fulletby
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
We charge the same wherever you are, with no extra for Fulletby. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
If you are in Fulletby and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About Fulletby
Fulletby is about 9 miles south of Louth, in Lincolnshire. Whether you are in the middle of Fulletby or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 732 places in Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 73 miles away.
Postcode districts we cover here: LN9. You will find streets such as High Street, Church Lane and Manor House Lane, and we cover them all. If you’re just outside Fulletby, we cover Belchford (1 mile north), Greetham (2 miles south), Tetford (2 miles east), High Toynton (2 miles south-west) and Scamblesby (3 miles north). Within a short drive, we also cover Louth (9 miles north), Horncastle (3 miles south-west), Mablethorpe (15 miles north-east), Woodhall Spa (9 miles south-west), Sutton on Sea (15 miles east) and Market Rasen (15 miles north-west).
What’s near Fulletby
We visit homes around Church of St Andrew and the streets around them. Well-known places in the area include War Memorial Hospital (3.2 miles south-west) and Horncastle (3.4 miles south-west). For a walk, there is Juicetrump Hill.
Towns and villages near Fulletby
More services for Fulletby
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Do you need bath re-enamelling in Fulletby?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
The things customers typically mention when they call include:
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Questions to ask before booking
- Aftercare advice
- What prep work is covered
- Whether the price covers travel
- How the colour is matched
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Your questions about bath re-enamelling in Fulletby
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What areas do you cover?
All of Lincolnshire, and the rest of the UK. There is no extra charge for travel.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
What you get with us
- Every repair guaranteed for a year
- Nothing taken out or refitted
- Work done at your home or business
- Same prices wherever you are
See our prices page and bath cost comparison.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Getting a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
