Northumberland · England
Bath re-enamelling & resurfacing in Burton, Northumberland
Our technicians come to Burton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- An outdated colour you’d like to change
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How we handle bath re-enamelling in Burton
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. We are frequently asked to fix chips and rust in more than one place and thin, worn enamel in places, in basins & shower trays, Victorian roll-tops and pressed steel baths.
Whatever the size of the job, you get the same one-year guarantee in Burton and across Northumberland.
- Area
- Burton (NE69)
- County
- Northumberland
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What happens on the day
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
Ask for a price
Most customers in Burton get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Common problems we fix in Burton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- Several chips and rust patches
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
- A coloured bath you want in white
What to look for in a quote
- Whether they match the colour on site
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- What happens if they find more damage
Places near Burton
Other services in Burton
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Do not leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What affects the price in Burton
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- What the surface is made of
- The size and number of damaged areas
- Unusual colours or finishes
- Previous DIY repairs that have to come out
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- Any earlier repairs or coatings
- The material, if you know it
- Where you are, by postcode
- Something in shot to show the size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Northumberland and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Repairing versus replacing in Burton
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- Normally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before booking
- No need to remove anything
Read our pricing and guide to resurfacing and replacement costs.
Burton and nearby
Burton is about 13 miles north of Alnwick, in Northumberland. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Burton is one of 189 places in Northumberland where we work. Our jobs stretch from Burton to Newcastle upon Tyne (about 42 miles away).
We work across NE69 and the streets around it. Nearby, we also work in Bamburgh (1 mile north-east), Waren Mill (2 miles west), North Sunderland (3 miles south-east), Seahouses (3 miles east) and Newham (3 miles south). Within a short drive, we also cover Alnwick (13 miles south), Wooler (12 miles west), Spittal (15 miles north-west), Belford (4 miles west), Longhoughton (12 miles south) and Beadnell (5 miles south-east).
Near you in Burton
Around Burton, we work in homes near Mizen Head Hotel and St Aidan's Church. The nearest railway station is Chathill station, about 4.1 miles south. Well-known places in the area include Bamburgh Castle (1.1 miles north-east) and RNLI Grace Darling Museum (0.9 miles north). Open spaces near Burton include Brada Hill.
FAQs for Burton
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
About our accreditations · Every repair comes with a one-year guarantee.
