Northumberland · England
Bath re-enamelling & resurfacing in Belsay, Northumberland
Full bath re-enamelling and resurfacing at your home in Belsay, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
About our bath re-enamelling in Belsay
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include a coating lifting around the plughole and chips and rust in more than one place, on cast iron baths, acrylic baths and pressed steel baths.
Every repair is covered by a one-year guarantee.
- Area
- Belsay (NE20)
- County
- Northumberland
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Belsay
We work for landlords, letting agents and housing providers in Belsay as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Belsay, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Common questions in Belsay
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
When to call us in Belsay
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
- Several chips and rust patches
- Wear marks under the taps
Before you book anyone
- Whether they match the colour on site
- How to look after the finish
- What prep work is covered
- What happens if the damage is worse than the photos show
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Belsay
- One price list for the whole UK
- A fixed quote before you book
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
Read our full price list and bath cost comparison.
About Belsay
Belsay is about 7 miles south-west of Morpeth, in Northumberland. Jobs in Belsay are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Belsay is one of 189 towns and villages in Northumberland where we work. We work right across the region, from Belsay to Newcastle upon Tyne (about 11 miles away).
Jobs in NE20 are booked in the same way as anywhere else. We also cover the places around Belsay: Capheaton (4 miles west), Stamfordham (5 miles south), Ingoe (5 miles south-west), Tranwell Woods (5 miles north-east) and Ponteland (6 miles south-east). We also work in nearby towns such as Blyth (13 miles east), Cramlington (10 miles east), Ashington (12 miles north-east), Morpeth (7 miles north-east), Bedlington (10 miles east) and Hexham (14 miles south-west).
Around Belsay
Typical jobs here are in homes near Belsay Primary School and the streets around them. Nearby you will also find Belsay Castle (1 mile west) and Stannington Sanatorium (5.7 miles east). Green spaces nearby include Sir Edward's Lake.
Nearby places to Belsay
Also in Belsay
What happens on the day
We work cleanly and quietly. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A bath that’s rusted through
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Belsay
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Belsay. The price reflects:
- How many items we do on one visit
- The colour and finish to match
- How much damage there is
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- The material, if you know it
- Whether it’s been repaired or coated before
- One picture of the whole bath
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
