Northumberland · England
Bath Repair for Belsay homes
Our repair technicians come to Belsay for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- An old repair that has yellowed or come loose
FAQs for Belsay
Do you cover Belsay?
Yes. We work across the UK and travel to Belsay. Send us pictures for a fixed quote, or call 0345 017 0787.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Bath repair in Belsay, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Typical jobs include an old repair that has yellowed or come loose and deep scratches in acrylic, in acrylic, pressed steel enamel and whirlpool & spa baths.
Every repair is covered by a one-year guarantee.
- Where
- Belsay (NE20)
- County
- Northumberland
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Belsay
Belsay is about 7 miles south-west of Morpeth, in Northumberland. Our technicians come to customers in Belsay and nearby villages, so there’s no workshop to go to. We cover 189 places across Northumberland. Our jobs stretch from Belsay to Newcastle upon Tyne (11 miles away).
Jobs in NE20 work the same way as everywhere else we cover. If you are just outside Belsay, we cover Capheaton (4 miles west), Stamfordham (5 miles south), Ingoe (5 miles south-west), Tranwell Woods (5 miles north-east) and Ponteland (6 miles south-east). Within a short drive, we also cover Blyth (13 miles east), Cramlington (10 miles east), Ashington (12 miles north-east), Morpeth (7 miles north-east), Bedlington (10 miles east) and Hexham (14 miles south-west).
Around Belsay
Our customers here include homes close to Belsay Primary School and the streets around them. A little further out are Belsay Castle (1 mile west) and Stannington Sanatorium (5.7 miles east). Green spaces nearby include Sir Edward's Lake.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair cannot fix:
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- The type of damage
- How hard the colour is to match
- Doing more than one item at once
- How much damage there is
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- Any details about the material
- Details of any past repairs
If you are in Belsay and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Signs you need bath repair in Belsay
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Look out for any of the following:
- Cracks in an acrylic bath
- A chip where the taps sit
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
Before you book anyone
- A fixed price, and whether VAT is included
- When it can be used again
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Give the bath a quick rinse after use
- Make sure an acrylic bath is firm underfoot
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you are working above it
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Repairing versus replacing in Belsay
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why book with us
- We leave the room as we found it
- Nothing taken out or refitted
- Most jobs done in one visit
- Fixed prices from your photos
Read our full price list or bath cost comparison.
Also near Belsay
Also in Belsay
The process
Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
