Lincolnshire · England
Bath Re-enamelling for Belvoir homes
Full bath re-enamelling and resurfacing for homes and businesses in Belvoir and across Lincolnshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Landlord and trade work in Belvoir
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Bath re-enamelling in Belvoir without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, we can help.
Every repair is covered by a one-year guarantee.
- Location
- Belvoir (NG32)
- Region
- Lincolnshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How much damage there is
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- Details of any past repairs
- One sharp close-up of the damage
- Something in shot to show the size
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Belvoir, and we will come back with a fixed quote.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
When to call us in Belvoir
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Customers normally contact us about:
- A coloured bath you want in white
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- Wear marks under the taps
What your quote should include
- A fixed price, and whether VAT is included
- What preparation is included
- The length of the guarantee and what it covers
- Whether they match the colour on site
Nearby places to Belvoir
What else we do in Belvoir
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Belvoir clients choose us
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow most of the day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
FAQs for Belvoir
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
What happens after I send pictures?
We come back with a fixed quote, typically with dates to choose from. You’re under no obligation.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we will ask for another angle.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
When a repair is not the answer
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Where we work around Belvoir
Belvoir is about 6 miles west of Grantham, in Lincolnshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Belvoir is one of 732 towns and villages in Lincolnshire where we work. Our nearest city page is Birmingham, about 55 miles away.
Every address in NG32 is within our area, from the main roads to the quietest streets. Other places close to Belvoir include Woolsthorpe by Belvoir (1 mile east), Knipton (2 miles south), Harston (2 miles south-east), Branston (3 miles south) and Croxton Kerrial (3 miles south-east). Larger places within reach include Grantham (6 miles east), Spittlegate (6 miles east), Gonerby Hill Foot (6 miles east), Earlesfield (5 miles east), Great Gonerby (6 miles north-east) and Manthorpe (7 miles east).
Near you in Belvoir
For rail, the closest station is Bottesford station, roughly 3.3 miles north of the centre. Well-known places in the area include Belvoir Castle (within half a mile south-east).
About our accreditations · Every repair comes with a one-year guarantee.
