Lincolnshire · England
Bath re-enamelling & resurfacing in Knipton, Lincolnshire
Our repair technicians come to Knipton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that is failing
Bath re-enamelling in Knipton without replacing anything
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you’re dealing with a peeling or bubbling previous coating and a period or roll-top bath worth keeping, we can help, on basins & shower trays, cast iron baths and pressed steel baths alike.
Big or small, it’s backed by a one-year guarantee.
- Area
- Knipton (NG32)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
- Let us know if it has been repaired before
Ask for a price
For a price in Knipton, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
What else we do in Knipton
Knipton: your questions answered
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
How much does bath re-enamelling cost in Knipton?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will there be a smell?
Expect a mild smell while we’re working.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Same prices wherever you are
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
Take a look at our pricing or bath cost comparison.
What we cannot put right
In fairness, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Covering Knipton
Knipton is about 6 miles south-west of Grantham, in Lincolnshire. From the centre of Knipton to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Knipton is one of 732 places in Lincolnshire we cover. Our jobs stretch from Knipton to Birmingham (about 54 miles away).
Our repair technicians cover all of NG32. We regularly work on streets such as Nursery Lane, Church Hill and Pasture Lane. Close by, we cover Harston (1 mile east), Croxton Kerrial (1 mile south-east), Branston (2 miles south-west), Belvoir (2 miles north) and Woolsthorpe by Belvoir (2 miles north-east). Within a short drive, we also cover Grantham (6 miles north-east), Spittlegate (6 miles east), Gonerby Hill Foot (6 miles north-east), Earlesfield (5 miles north-east), Great Gonerby (6 miles north-east) and Manthorpe (7 miles north-east).
Near you in Knipton
Typical jobs here are in homes near Church of All Saints. The closest station to Knipton is Bottesford station, roughly 5 miles north of the centre. Well-known places in the area include Belvoir Castle (1.5 miles north).
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Repair dripping taps early
Dry the bath after use if possible, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Landlord and trade work in Knipton
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- The material and finish
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Knipton. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- Natural light rather than flash
- What it’s made of, if you know
- One picture of the entire bath
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
