Lincolnshire · England

Bath re-enamelling & resurfacing in Denton, Lincolnshire

Full bath re-enamelling and resurfacing at your home in Denton, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Stains that will not shift
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Denton homes

Bath re-enamelling at your home in Denton

We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you’re dealing with enamel that’s lost its shine and feels rough and a coating lifting around the plughole, we can usually put it right.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Denton (NG32)
Region
Lincolnshire
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Common problems we fix in Denton

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

People normally call us when they notice something like this:

  • Staining under the taps and around the waste
  • Wear marks under the taps
  • Chips and rust in more than one place
  • A peeling or bubbling previous coating

Questions to ask before booking

  • Whether the colour is mixed to match
  • What prep work is covered
  • How the room is protected while they work
  • Aftercare advice

How to compare quotes

What bath re-enamelling costs

Prices start from £350. We charge the same across the UK, including Denton. The price reflects:

  • Doing more than one item at once
  • How much damage there is
  • How hard the colour is to match
  • The material

The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.

Quotes from your photos

Two or three clear photos are usually enough. It helps if you send:

  • Something in shot to show the size
  • A clear, close picture of the problem area
  • Where you are, by postcode
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.

Denton questions

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

It’s been repaired before. Can you still fix it?

Yes, we often do. It can add a little time, which we include in the quote.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Will the new finish last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Is a repair better than a new one?

Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Landlord and trade work in Denton

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

Keeping it looking good

So the finish stays in good condition for years:

  • Do not leave a chip unrepaired
  • A dripping tap should be fixed promptly
  • Wipe the bath dry after use in hard water areas
  • Rinse off hair dye, oils and bath bombs right away

Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

The process

You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we are there.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Make sure the area is dry
  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings

Get a quote

To get a price, send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.

Get a free quote

Advice

Honest limits

A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:

  • A poorly supported acrylic bath, until it’s firmed up
  • Anything hidden under an old coating, until we remove it
  • Steel that has corroded right through

Send us photos and we will tell you honestly.

What we work on

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

Denton and the surrounding area

Denton is about 4 miles south-west of Grantham, in Lincolnshire. From the centre of Denton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 732 places across Lincolnshire, from the larger towns to small villages. You can also see our page for Birmingham, about 57 miles away.

Here we cover the NG32 postcode area. That includes homes on Main Street, Church Street and Nether Lane. If you’re just outside Denton, we cover Harston (2 miles west), Woolsthorpe by Belvoir (2 miles north-west), Knipton (3 miles west), Croxton Kerrial (3 miles south-west) and Belvoir (3 miles west). Larger places within reach include Grantham (4 miles north-east), Sleaford (15 miles north-east), Spittlegate (3 miles north-east), Gonerby Hill Foot (4 miles north-east), Quarrington (14 miles north-east) and Great Gonerby (4 miles north-east).

What’s near Denton

We visit homes around Walton Girls High School, Denton CofE School and The Welby Arms, among other places. For rail, the closest station is Grantham station, roughly 3.3 miles north-east. A little further out are Grantham and Kesteven Hospital (3.9 miles north-east) and Belvoir Castle (3 miles west).

Map of Denton © OpenStreetMap contributors

Different materials, different repairs

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.