Surrey · England

Bath re-enamelling & resurfacing in Bentley, Surrey

Bath re-enamelling for Bentley, without a refit. Send us photos for a fixed price, then book a visit.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Thin, worn enamel in places
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Bentley

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

About our bath re-enamelling in Bentley

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on acrylic baths, basins & shower trays and Victorian roll-tops, and people most often call us about wear marks under the taps and an old resurfacing that’s failing.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Roll-top bath being refinished by a Surface Doctor technician
Location
Bentley (GU10, GU34)
Region
Surrey
Guarantee
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What we do, step by step

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day, including clearing up.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Let us know which floor the room is on
  • Open a window if you can
  • Keep a parking space free if you can

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.

Send pictures for a quote

Read more

Should you replace it?

Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • Colour-matched on site
  • One-year guarantee on every repair
  • Accredited with CHAS, Constructionline and SafeContractor
  • Honest advice, even when it means no job

Take a look at our pricing and bath cost comparison.

What we’re called out for in Bentley

Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.

The most common problems we’re called about are:

  • Stains that won’t shift
  • A bath that stays dull however much you clean it
  • Several chips and rust patches
  • A roll-top that is seen better days

What your quote should include

  • Whether the price covers travel
  • Whether a trained technician does the job
  • The length of the guarantee and what it covers
  • What happens if the damage is worse than the pictures show

Choosing a repair company

Bentley questions

How much does bath re-enamelling cost in Bentley?

Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.

Do you come to Bentley?

Yes. We work across the UK and come to Bentley. Send us pictures for a fixed quote, or call 0345 017 0787.

Is repairing better than replacing?

Normally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Can you re-enamel a roll-top bath?

Yes. Inside and out.

Can a failed resurfacing be redone?

Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.

Is there a guarantee?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Don’t let dyes or oils sit on the finish
  • Use washing-up liquid and a soft cloth
  • Store bottles off the bath
  • Avoid suction-cup mats

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

What affects the price in Bentley

Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:

  • What the surface is made of
  • Doing more than one item at once
  • Access to the area
  • The type of damage

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

How to get a fixed quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A coin beside the damage so we can judge size
  • What it’s made of, if you know
  • A wider photo showing the entire bath
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.

Covering Bentley

Bentley is about 4 miles west of Farnham, in Surrey. We travel to homes and businesses in Bentley and the surrounding area, so there is no workshop to go to. Bentley is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 40 miles away.

Here we cover the GU10 and GU34 postcode area. Streets in the area include Station Road, Broadlands Close and Eggars Field. Close by, we cover Isington (1 mile south-west), Blacknest (1 mile south-east), Bucks Horn Oak (2 miles south-east), Holt Pound (2 miles east) and Binsted (2 miles south). Larger places within reach include Guildford (14 miles east), Camberley (12 miles north-east), Farnham (4 miles east), Frimley (11 miles north-east), Haslemere (10 miles south-east) and Ash (8 miles north-east).

Around Bentley

Locally, our jobs take us to homes close to The Star Inn, Bentley Church of England Primary School and Church of St Mary, among other places. For rail, the closest station is Bentley (Hampshire) station, about 0.8 miles south-east. Well-known places in the area include Barley Pound (1.7 miles north-east) and Chase Community Hospital (5.9 miles south). The countryside around Bentley includes Farnham Park and Holybourne Hill.

Map of Bentley © OpenStreetMap contributors

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Honest limits

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • A bath that is rusted through
  • Anything hidden under an old coating, until we remove it
  • Leaks from fittings rather than the bath

If in doubt, send photos and we will say what we think.

Materials we repair

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.