West Sussex · England
Bath Re-enamelling for Bepton Common homes
Bath re-enamelling in and around Bepton Common: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that will not shift
- A coating lifting around the plughole
Bath re-enamelling in Bepton Common without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on pressed steel baths, Victorian roll-tops and basins & shower trays, and common reasons people get in touch are a peeling or bubbling previous coating and a roll-top that’s seen better days.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Bepton Common (GU29)
- County
- West Sussex
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Places near Bepton Common
Also in Bepton Common
Do you need bath re-enamelling in Bepton Common?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
The most common problems we’re called about are:
- A coloured bath you want in white
- Stains that will not shift
- Wear marks under the taps
- An original cast iron bath that needs restoring
Before booking anyone
- What prep work is covered
- How your room will be protected
- A fixed price, and whether VAT is included
- What happens if they find more damage
Bepton Common and nearby
Bepton Common is about 8 miles east of Petersfield, in West Sussex. Our technicians come to homes and businesses in Bepton Common and nearby villages, so there’s no workshop to go to. We work in 371 places in West Sussex. Our jobs stretch from Bepton Common to London (46 miles away).
Our repair technicians cover all of the GU29 postcode area. Jobs here include addresses on Bepton Road and Severals Road. If you are just outside Bepton Common, we cover Midhurst (1 mile north-east), Cocking Causeway (1 mile south-east), Minsted (1 mile west), West Lavington (1 mile east) and Stedham (1 mile north-west). We also work in nearby towns such as Bognor Regis (13 miles south), Chichester (10 miles south), Littlehampton (15 miles south-east), Emsworth (12 miles south-west), Storrington (14 miles east) and Billingshurst (14 miles east).
Landmarks near Bepton Common
Typical jobs here are in homes near Midhurst Rother College, The Royal Oak Public House and Roman Catholic Church of Divine Motherhood. Other local landmarks include St Margaret's Convent (0.9 miles north-east) and Midhurst CofE Primary School (0.7 miles north-east). A little further out are Midhurst Community Hospital (1.4 miles north-east) and Midhurst Museum (1 mile north-east). Green spaces nearby include Levin Down and Iping and Stedham Commons.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The material and finish
- Whether we combine several jobs
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- Something in shot to show the size
- Details of any past repairs
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Keeping it looking good
Looking after the surface is easy:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs immediately
- Clean with a soft cloth and mild detergent
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How it works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why us?
- Free fixed quotes from pictures
- Nothing taken out or refitted
- No extra charge for your area
- Dust sheets down, tidy finish
Take a look at our full price list or resurfacing vs replacement cost guide.
FAQs for Bepton Common
Which areas do you work in?
Everywhere in the UK, Bepton Common included. Travel is included in the price.
Is there any odour?
Expect a mild smell while we’re working.
Do you work in Bepton Common?
We do. We send a technician to Bepton Common for every job, with no extra charge for travel.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Work for landlords and builders
Landlords, letting agents and housing providers in Bepton Common use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
