West Sussex · England
Bath Re-enamelling for Minsted homes
Bath re-enamelling for Minsted, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places

Bath re-enamelling in Minsted, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We work on acrylic baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are wear marks under the taps and brown or grey marks that don’t clean off.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Minsted (GU29)
- County
- West Sussex
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026

DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Minsted. The price depends on:
- How easy the damage is to reach
- What the surface is made of
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- One picture of the whole bath
- Where you are, by postcode
For a price in Minsted, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Keeping it looking good
To keep it looking its best for years:
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Repair dripping taps early
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Repair or replace in Minsted?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Minsted customers choose us
- One visit for most repairs
- Work done at your home or business
- CHAS and Constructionline accredited
- One price list for the whole UK
See our full price list and guide to resurfacing and replacement costs.
Honest limits
It helps to know what we cannot do:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Our work in Minsted
Minsted is about 7 miles east of Petersfield, in West Sussex. Jobs in Minsted are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Minsted is one of 371 towns and villages in West Sussex where we work. We work right across the region, from Minsted to London (46 miles away).
Our visits in GU29 are booked in the same way as anywhere else. We regularly work on streets such as Andrews Lane and Minsted Road and the roads around them. If you are just outside Minsted, we cover Stedham (1 mile north-east), Bepton Common (1 mile east), Iping (1 mile north), Woolbeding (1 mile north-east) and Midhurst (2 miles east). Larger places within reach include Bognor Regis (14 miles south), Chichester (10 miles south), Emsworth (11 miles south-west), Storrington (15 miles east), Billingshurst (15 miles east) and Portfield (10 miles south).
Local landmarks in Minsted
Our customers here include homes close to Midhurst Rother College, Stedham Primary School and The Parish Church of St James. Further afield, we also cover the area around Midhurst Community Hospital (2.1 miles east) and Lodsworth Castle (4.8 miles east). The countryside around Minsted includes Wheeler's Down and Iping and Stedham Commons.
Nearby places to Minsted
More services for Minsted
Do you need bath re-enamelling in Minsted?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Most people contact us after spotting one of these:
- A roll-top that’s seen better days
- Stains that won’t shift
- A peeling or bubbling previous coating
- Thin, worn enamel in places
What your quote should include
- If travel is included in the price
- Aftercare advice
- Who turns up on the day
- How changes to the job are handled
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know about parking or access
- Keep pets and children out of the room while we work
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Minsted questions
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How much does bath re-enamelling cost in Minsted?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Do you cover the entire of West Sussex?
We cover the whole UK, including Minsted and the rest of West Sussex. Just include your postcode and we will confirm dates.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
About our accreditations · Every repair comes with a one-year guarantee.

