West Sussex · England

Bath re-enamelling & resurfacing in Woolbeding, West Sussex

Our technicians come to Woolbeding for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Woolbeding?

Bath re-enamelling in Woolbeding without replacing anything

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our repair technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about chips and rust in more than one place and wear marks under the taps.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Area
Woolbeding (GU29)
Area hub
West Sussex
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Landlords, agents and businesses in Woolbeding

We work for landlords, letting agents and housing providers in Woolbeding as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

What we do, step by step

There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a full day, tidy-up included.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Make sure the room can be ventilated
  • Point us to the nearest place to park

Getting a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Read more

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • Leaking taps or wastes (a plumber’s job)
  • A bath split right through the body
  • Steel that has corroded right through

Send us pictures and we’ll tell you honestly.

Materials we work on in Woolbeding

  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths

What your bath is made of matters

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

When to call us in Woolbeding

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

Signs it’s time to call us include:

  • Brown or grey marks that don’t clean off
  • An outdated colour you’d like to change
  • Enamel that is lost its shine and feels rough
  • Several chips and rust patches

Questions to ask before you book

  • When it can be used again
  • What the guarantee covers, and for how long
  • A fixed quote, and whether VAT is included
  • What happens if the damage is worse than the pictures show

How to compare quotes

Woolbeding and nearby

Woolbeding is about 6 miles south of Haslemere, in West Sussex. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 371 places across West Sussex. You can also see our page for London, about 45 miles away.

Here we cover the GU29 postcode area. We also travel to Stedham (1 mile west), Midhurst (1 mile south-east), Easebourne (1 mile east), Iping (1 mile west) and Bepton Common (1 mile south). Further out, we also cover Bognor Regis (15 miles south), Chichester (11 miles south), Emsworth (13 miles south-west), Storrington (14 miles east), Billingshurst (13 miles east) and Portfield (11 miles south).

Around Woolbeding

Our customers here include homes close to Midhurst Rother College, Stedham Primary School and The Parish Church of All Hollows. Further afield, we also cover the area around Lodsworth Castle (3.9 miles east) and Midhurst Museum (1.2 miles south-east). Not far away are Iping and Stedham Commons and Wheeler's Down.

Map of Woolbeding © OpenStreetMap contributors

Woolbeding: your questions answered

What happens next?

You will get a fixed quote back, plus dates. You are under no obligation.

Do you come to Woolbeding?

We do. Technicians travel to Woolbeding from across the region, and the price is the same as everywhere else.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Which areas do you work in?

Everywhere in the UK, Woolbeding included. Travel is included in the price.

Can you repair several things at once?

Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Repairing versus replacing in Woolbeding

Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Prices start from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Straight answers about what a repair can do
  • No need to remove anything
  • Rooms protected and left tidy
  • Colours mixed by hand to suit your surface

Take a look at our pricing or resurfacing vs replacement cost guide.

How we price bath re-enamelling

Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:

  • Where the damage is and how we get to it
  • What kind of damage it is
  • Unusual colours or finishes
  • Whether we combine several jobs

Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what helps:

  • Any details about the material
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • A photo taken from further back

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.