Devon · England
Bath re-enamelling & resurfacing in Bere Ferrers, Devon
Bath re-enamelling in Bere Ferrers without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
When to call us in Bere Ferrers
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
You may need us if you’ve spotted:
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- Lots of chips and rust spots
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- How to look after the finish
- If travel is included in the price
- How soon you can use it again
About our bath re-enamelling in Bere Ferrers
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are staining under the taps and around the waste and a period or roll-top bath worth keeping.
Every repair comes with a one-year guarantee.
- Where
- Bere Ferrers (PL20)
- Region
- Devon
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Before booking, it’s worth knowing the limits:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Bere Ferrers: your questions answered
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Nearby places to Bere Ferrers
What else we do in Bere Ferrers
Bere Ferrers and nearby
Bere Ferrers is about 4 miles north-east of Saltash, in Devon. Anywhere in PL20, we come to you. We cover all 586 towns and villages in Devon, from the larger towns to small villages.
Our visits in PL20 work the same way as everywhere else we cover. You will find streets such as Station Road, Drummond Way and Fore Street, and we cover them all. If you’re just outside Bere Ferrers, we cover Tamerton Foliot (2 miles south-east), Bere Alston (2 miles north), Ernesettle (2 miles south), Whitleigh (3 miles south-east) and Roborough (3 miles east). Larger places within reach include Tavistock (7 miles north), Ivybridge (12 miles east), South Brent (15 miles east), Yealmpton (11 miles south-east), Tiddy Brook Meadows (6 miles north) and Horrabridge (5 miles north-east).
Around Bere Ferrers
Typical jobs here are in homes near Olde Plough Inn, Church of St Andrew and Church of St Andrew, among other places. Bere Ferrers has its own railway station: Bere Ferrers station. Well-known places in the area include Tamar Belle Visitor Centre (within half a mile west) and Pentillie (2.9 miles west). Green spaces nearby include Berra Tor.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Ensure the area is dry
- Tell us if there are stairs or a lift
Get a quote
If you are in Bere Ferrers and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Bere Ferrers, we’ll quote for several properties at once. Send photos for each one and we will price them together.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- How hard the colour is to match
- Access to the area
- The type of damage
- How many items we do on one visit
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why book with us
- Work done at your home or business
- Everything repaired in place
- Dust sheets down, tidy finish
- One price list for the whole UK
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
