Gloucestershire · England
Bath Re-enamelling for Berkeley homes
Bath re-enamelling for Berkeley, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Berkeley
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for a peeling or bubbling previous coating and a bath in a colour that no longer suits, across Victorian roll-tops, cast iron baths and pressed steel baths.
Big or small, you get the same one-year guarantee.
- Area
- Berkeley (GL13)
- Region
- Gloucestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Do not use the bath until it has fully cured
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
- Do not leave a chip unrepaired
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Berkeley and the surrounding area
Berkeley is about 6 miles north-east of Thornbury, in Gloucestershire. We visit homes and businesses in Berkeley and nearby villages, so you don’t need to take anything anywhere. Our technicians cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Berkeley to Birmingham (about 59 miles away).
Every address in GL13 is within our area, from the main roads to the quietest streets. Whether you live on High Street, Station Road and Marybrook Street or a nearby road, we can come to you. We also cover the places around Berkeley: Oakhunger (1 mile west), Ham (1 mile south), Berkeley Heath (1 mile east), Newport (1 mile south-east) and Swanley (2 miles south-east). Within a short drive, we also cover Gloucester (15 miles north-east), Stroud (10 miles east), Quedgeley (12 miles north-east), Lydney (4 miles north-west), Tredworth (14 miles north-east) and Kingsway Village (12 miles north-east).
Near you in Berkeley
In Berkeley, that means homes near Church of St Mary the Virgin, Berkeley Arms Hotel and Berkeley Primary School, among other places. Other local landmarks include Vale of Berkeley College (0.9 miles west) and SGS Berkeley Green UTC (1.6 miles west). Berkeley’s nearest station is Lydney station, roughly 3.4 miles north-west of the centre. Well-known places in the area include Berkeley Castle (under half a mile south-east) and Vale Community Hospital (4.5 miles east). For a walk, there is WWT Slimbridge.
What else we do in Berkeley
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Fixed prices from your pictures
- Every repair guaranteed for a year
- Generally one visit, start to finish
- We come to you, anywhere in the UK
See our full price list or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. We don’t charge extra for travel to Berkeley. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The material
- Previous DIY repairs that have to come out
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Where you are, by postcode
- Something in shot to show the size
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say right away if a repair is the right fix.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Berkeley: your questions answered
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Landlord and trade work in Berkeley
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Berkeley use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What we do, step by step
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. Allow the best part of a day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
How to get a price
Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Berkeley, and we’ll reply with a fixed quote.
Read more
What we cannot put right
Some jobs are not right for a repair, for example:
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
