Gloucestershire · England
Bath Re-enamelling in Bevington
We travel to Bevington for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Worn patches where water runs and sits
- Staining under the taps and around the waste
About our bath re-enamelling in Bevington
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are wear marks under the taps and staining under the taps and around the waste.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Bevington (GL13)
- Region
- Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Bevington
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Are there extra charges for Bevington?
We do not add a call-out fee. Your fixed quote includes everything.
How much does bath re-enamelling cost in Bevington?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a picture of the whole item with your GL13 postcode.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When a repair is not the answer
It helps to know what we can’t do too:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
What we are called out for in Bevington
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is usually as strong as ever.
Get in touch if you’ve noticed:
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
- Wear marks under the taps
- A roll-top that’s seen better days
Before you book anyone
- What happens if they find more damage
- How to care for the finish
- Whether the colour is mixed to match
- If travel is included in the price
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Landlords, agents and businesses in Bevington
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Our work in Bevington
Bevington is about 4 miles north of Thornbury, in Gloucestershire. Anywhere in GL13, we come to you. We cover all 470 towns and villages across Gloucestershire, from the larger towns to small villages. We work right across the region, from Bevington to Birmingham (61 miles away).
We cover every part of the GL13 postcode area. Nearby, we also work in Ham (2 miles north-east), Lower Stone (2 miles south-east), Oakhunger (2 miles north-east), Stone (2 miles south-east) and Moorslade (2 miles south-east). Further out, we also cover Stroud (13 miles north-east), Quedgeley (14 miles north-east), Lydney (4 miles north), Kingsway Village (14 miles north-east), Cam (6 miles east) and Stonehouse (11 miles north-east).
What’s near Bevington
Typical jobs here are in homes near SGS Berkeley Green UTC, Vale of Berkeley College and Church of St Michael, among other places. The closest station to Bevington is Lydney station, roughly 3.4 miles north-west. Other landmarks nearby include Berkeley Castle (2.1 miles north-east) and Lydney Park Museum (3.9 miles north-west).
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Bevington clients choose us
- Fixed prices from your photos
- Colour-matched on site
- No need to remove anything
- We’ll tell you if it’s not worth repairing
Take a look at our full price list or resurfacing vs replacement cost guide.
More services for Bevington
About our accreditations · Every repair comes with a one-year guarantee.
