Lancashire · England
Bath re-enamelling & resurfacing in Beverley, Lancashire
Local bath re-enamelling for Beverley: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath in a colour that no longer suits
Do you need bath re-enamelling in Beverley?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
People typically call us after spotting one of these:
- Thin, worn enamel in places
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
Questions to ask before you book
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- How the room is protected while they work
- What prep work is covered
Bath re-enamelling at your home in Beverley
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you’re dealing with an old resurfacing that’s failing and wear marks under the taps, we can help.
All our work is covered by our one-year guarantee, wherever you are in Lancashire.
- Area
- Beverley (BB9)
- County
- Lancashire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Beverley
What else we do in Beverley
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- How easy the damage is to reach
- The material
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, with no extra for Beverley. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Any earlier repairs or coatings
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Honest limits
In fairness, there are a few things a repair will not fix:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Covering Beverley
Beverley is about 2 miles north-west of Colne, in Lancashire. Whether you’re in the middle of Beverley or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 482 places across Lancashire, from the larger towns to small villages. Our jobs stretch from Beverley to Manchester (27 miles away).
Every address in BB9 is covered. Local streets include Beverley Road, Willaston Avenue and Back Gisburn Road. If you’re just outside Beverley, we cover Blacko (1 mile north-west), Higherford (1 mile south), Roughlee (1 mile south-west), Barrowford (1 mile south) and Thorney Holme (2 miles south-west). Larger places within reach include Burnley (6 miles south), Accrington (10 miles south-west), Rawtenstall (12 miles south), Clitheroe (7 miles west), Haslingden (13 miles south) and Bacup (12 miles south).
Around Beverley
Our customers here include homes close to Blacko Primary School, Colne Primet Academy and Rising Sun pub, among other places. For rail, the closest station is Colne station, about 1.6 miles south-east of the centre. Other landmarks nearby include Pendle Community Hospital (2.1 miles south) and Colne Public Library And Museum (1.7 miles south-east). Not far away are Weets Hill.
What we do, step by step
Arrival times are agreed in advance. On site, it takes most of the day for most jobs. The room is left tidy and you’ll know when it can be used.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Open a window if you can
How to get a price
For a price in Beverley, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Questions from Beverley
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do you come to Beverley?
Yes. We work across the UK and travel to Beverley and the rest of Lancashire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What areas do you cover?
All of Lancashire, and the rest of the UK. There is no extra charge for travel.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why book with us
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- Normally one visit, start to finish
See our full price list or bath cost comparison.
Work for landlords and builders
If you manage property in Beverley, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How to look after the repair
After the repair has cured, a few habits help it last:
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Have chips seen to early
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
