Lincolnshire · England
Bath re-enamelling & resurfacing in Bicker Gauntlet, Lincolnshire
Bath re-enamelling in Bicker Gauntlet without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Bicker Gauntlet
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. We are frequently asked to fix staining under the taps and around the waste and lots of chips and rust spots, on basins & shower trays, acrylic baths and cast iron baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Bicker Gauntlet (PE20)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Bicker Gauntlet
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- The material and finish
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Unusual colours or finishes
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Details of any past repairs
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
FAQs for Bicker Gauntlet
What happens once I’ve sent photos?
We review the pictures and send a fixed quote.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you’ll get one combined price.
What areas do you cover?
The entire UK, including all of Lincolnshire. Just include your postcode and we will confirm dates.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Where we work around Bicker Gauntlet
Bicker Gauntlet is about 7 miles south-west of Boston, in Lincolnshire. From the centre of Bicker Gauntlet to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 732 places across Lincolnshire. You can also see our page for Birmingham, about 78 miles away.
Here we cover the PE20 postcode area. Local streets include Fore Lane, Back Lane and North Drove, all of which we cover. Neighbouring places we cover include Bicker (1 mile south), Bicker Bar (1 mile east), Swineshead (1 mile north-east), Drayton (2 miles east) and Hoffleet Stow (2 miles south-east). Larger places within reach include Boston (7 miles north-east), Spalding (10 miles south), Sleaford (10 miles north-west), Bourne (14 miles south-west), Holbeach (12 miles south-east) and Austerby (14 miles south-west).
Local landmarks in Bicker Gauntlet
Around Bicker Gauntlet, we work in homes near Church of St Swithin and The Thomas Cowley High School and the streets around them. Bicker Gauntlet’s nearest station is Swineshead station, about 2.4 miles north of the centre.
When to call us in Bicker Gauntlet
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Most people contact us when they notice one of these:
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Lots of chips and rust spots
- A peeling or bubbling previous coating
What your quote should include
- How to care for the finish
- The length of the guarantee and what it covers
- How your room will be protected
- Whether there are any call-out or travel charges
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Have chips seen to early
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Landlord and trade work in Bicker Gauntlet
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Also near Bicker Gauntlet
Also in Bicker Gauntlet
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before booking.
Why us?
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
- Nothing taken out or refitted
- One price list for the entire UK
See our prices page or guide to resurfacing and replacement costs.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
