Lincolnshire · England

Bath Resealing in Bicker Gauntlet

Bath, shower and sink resealing with new mould-resistant silicone in Bicker Gauntlet, carried out at your home and guaranteed for a year.

  • Discoloured, yellow sealant
  • Water getting behind the bath or tray
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Bicker Gauntlet

Bath resealing in Bicker Gauntlet without replacing anything

Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. We work on baths, wet rooms and shower trays & enclosures, and common reasons people contact us are leaks at the edges and old sealant that looks dirty.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Technician in a mask working on a freestanding roll-top bath
Area
Bicker Gauntlet (PE20)
Region
Lincolnshire
Guarantee
One year on every repair
Price
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

When we would advise against a repair

Before booking, it’s worth knowing the limits:

  • Rotten walls or floors behind the bath
  • Hollow or loose tiles
  • Gaps too big for silicone alone

Send us photos and we will tell you honestly before booking.

Materials we work on in Bicker Gauntlet

  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units
  • Baths

How the visit works

Arrival times are agreed in advance. Once we are there, the work takes about two hours for a bath in most cases. The room is left tidy and ready to use once it has cured.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Make sure the area is dry
  • Open a window if you can

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Send photos for a quote

Read more

What we are called out for in Bicker Gauntlet

Poor ventilation speeds things up: damp hangs around, and mould grows faster.

Signs it’s time to call us include:

  • Silicone smeared on tiles
  • Discoloured, yellow sealant
  • Leaks at the edges
  • Mould you can’t clean out

Questions to ask before booking

  • Whether the price is fixed and includes VAT
  • The length of the guarantee and what it covers
  • How the room is protected while they work
  • How the colour is matched

Our hiring checklist

Common questions in Bicker Gauntlet

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before and we will plan for it.

Why does my sealant keep going mouldy?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can new silicone go over old?

We always remove the old sealant completely. New silicone will not bond to old.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

How long before I can shower?

We will give you the curing time.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Keep bottles off the joints
  • Keep the joints dry
  • Give the seal a regular clean
  • Replace the seal when mould sets in

Leave the sealant to cure for the time we give you, typically around 24 hours.

Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

About Bicker Gauntlet

Bicker Gauntlet is about 7 miles south-west of Boston, in Lincolnshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover all 732 towns and villages across Lincolnshire, from the larger towns to small villages. You can also see our page for Birmingham, about 78 miles away.

Here we cover the PE20 postcode area. We regularly work on streets such as Fore Lane, Back Lane and North Drove and the roads around them. We also cover the places around Bicker Gauntlet: Bicker (1 mile south), Bicker Bar (1 mile east), Swineshead (1 mile north-east), Drayton (2 miles east) and Hoffleet Stow (2 miles south-east). We also work in nearby towns such as Boston (7 miles north-east), Spalding (10 miles south), Sleaford (10 miles north-west), Bourne (14 miles south-west), Holbeach (12 miles south-east) and Austerby (14 miles south-west).

Near you in Bicker Gauntlet

Around Bicker Gauntlet, we work in homes near Church of St Swithin and The Thomas Cowley High School, among other places. Bicker Gauntlet’s nearest station is Swineshead station, about 2.4 miles north.

Map of Bicker Gauntlet © OpenStreetMap contributors

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Materials and what they mean for the repair

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

What affects the price in Bicker Gauntlet

There’s no charge for travel to Bicker Gauntlet. The price comes down to:

  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

Our prices are the same across the UK, with no extra for Bicker Gauntlet. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from pictures

You can take the pictures on your phone. Make sure they show:

  • Your postcode, so we can check dates
  • A picture taken from further back
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

If you’re in Bicker Gauntlet and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.