East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Bielby, East Riding of Yorkshire
We travel to Bielby for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
About our bath re-enamelling in Bielby
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, we can help, on Victorian roll-tops, basins & shower trays and cast iron baths alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Bielby (YO42)
- Region
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Looking after the surface is easy:
- Repair dripping taps early
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Repair or replace in Bielby?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- Nothing taken out or refitted
- Work done at your home or business
- Same prices wherever you are
- A fixed quote before booking
Take a look at our full price list or guide to resurfacing and replacement costs.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What the surface is made of
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from pictures
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- Good light, ideally daylight, without flash glare
- Any details about the material
- A picture taken from further back
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
FAQs for Bielby
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What areas do you cover?
All of East Riding of Yorkshire, and the rest of the UK. Travel is included in the price.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Places near Bielby
Also in Bielby
How the visit works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Bielby and the surrounding area
Bielby is about 3 miles south of Pocklington, in East Riding of Yorkshire. Whether you are in the middle of Bielby or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Bielby is one of 299 towns and villages in East Riding of Yorkshire where we work. You can also see our page for Leeds, about 31 miles away.
Our repair technicians cover all of YO42 and the streets around it. We also cover the places around Bielby: Seaton Ross (1 mile south), Melbourne (2 miles west), Allerthorpe (2 miles north), Hayton (2 miles north-east) and Harswell (3 miles south-east). We also work in nearby towns such as Beverley (15 miles east), Goole (12 miles south), Pocklington (3 miles north), Market Weighton (6 miles east), Brough (14 miles south-east) and Howden (10 miles south).
Local landmarks in Bielby
Locally, our jobs take us to homes close to Church of St Giles. Further afield, we also cover the area around The Stewart Museum (3.4 miles north).
What we are called out for in Bielby
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Get in touch if you’ve noticed:
- A dull, rough surface that will not come clean
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
Before you book anyone
- How soon you can use it again
- What preparation is included
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
What a repair can’t fix
We will always be straight with you, so here’s what a repair will not do:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Bielby
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
