East Riding of Yorkshire · England

Shower tray repair & resurfacing in Bielby, East Riding of Yorkshire

We travel to Bielby for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Cracks running from the waste
  • Chips on the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Bielby?

How to look after the repair

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Store bottles off the tray
  • Keep the bathroom well ventilated
  • Check the seal every few months
  • Give the tray a quick rinse after use

Store heavy bottles on a shelf, not on the tray, to avoid chips.

Do not keep using a cracked tray. Water can get through to the floor and walls, where it causes damage you can’t see.

Shower tray repair at your home in Bielby

A worn or stained tray can be resurfaced, giving it a fresh, even finish. If you’re dealing with a crack across the base and chips or cracks by the plughole, we can usually put it right, on cast iron, ceramic and acrylic alike.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Area
Bielby (YO42)
Area hub
East Riding of Yorkshire
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Repairs by material

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Landlord and trade work in Bielby

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.

We carry out planned and one-off repairs for housing associations and facilities teams in East Riding of Yorkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Signs you need shower tray repair in Bielby

Heavy bottles, shower heads and dropped razors chip trays, normally along the edges or by the waste.

Most people contact us when they notice something like this:

  • Chips or cracks by the plughole
  • Scratches in the surface
  • A tray that flexes
  • Cracks running from the waste

What your quote should include

  • How changes to the job are handled
  • Whether there are any call-out or travel charges
  • Whether the price is fixed and includes VAT
  • What prep work is covered

Our hiring checklist

What we cannot put right

Not everything can be repaired, and we will tell you before we start. Repairs will not solve:

  • Movement caused by a poor base, until the support is fixed
  • Water damage to the floor beneath the tray
  • Plumbing leaks under the tray

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we work on in Bielby

  • Acrylic
  • Cast iron
  • Enamelled steel
  • Stone resin
  • Ceramic

What shower tray repair costs

Prices start from £95. Prices are worked out job by job. The main factors are:

  • The colour and finish to match
  • The type of damage
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from photos

You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:

  • A clear, close picture of the problem area
  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • The postcode, so we can plan the visit

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Covering Bielby

Bielby is about 3 miles south of Pocklington, in East Riding of Yorkshire. We travel to clients in Bielby and the surrounding area, so there is no workshop to go to. We work in all 299 towns and villages in East Riding of Yorkshire. Our jobs stretch from Bielby to Leeds (31 miles away).

We cover every part of YO42 and the streets around it. We also cover the places around Bielby: Seaton Ross (1 mile south), Melbourne (2 miles west), Allerthorpe (2 miles north), Hayton (2 miles north-east) and Harswell (3 miles south-east). Within a short drive, we also cover Beverley (15 miles east), Goole (12 miles south), Pocklington (3 miles north), Market Weighton (6 miles east), Brough (14 miles south-east) and Howden (10 miles south).

What’s near Bielby

In Bielby, that means homes near Church of St Giles. Further afield, we also cover the area around The Stewart Museum (3.4 miles north).

Map of Bielby © OpenStreetMap contributors

Bielby: your questions answered

What happens after I send photos?

You’ll get a fixed quote back. You’re under no obligation.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

How do I get a price for shower tray repair in Bielby?

Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your YO42 postcode.

Do you reseal the tray as well?

We can. It’s a good time to replace old sealant.

Is a repair better than a new one?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Can a stained tray be refinished?

Yes. We can resurface the whole tray for a fresh finish.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

What we do, step by step

You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a few hours for a repair, longer for a full resurface, and you are welcome to carry on with your day while we work.

  1. We make sure the tray does not flex and look for the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. The repair is colour matched, or the whole tray gets a new finish.
  5. We leave it to cure; the shower is normally usable the day after.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the entire shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.

Send photos for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.