Coventry · England
Bath re-enamelling & resurfacing in Binley, Coventry
Bath re-enamelling for Binley, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- Stains that will not shift
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Bath re-enamelling in Binley without replacing anything
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. We work on basins & shower trays, pressed steel baths and cast iron baths, and people most often call us about several chips and rust patches and an outdated colour you’d like to change.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Binley (CV3, CV2)
- Region
- Coventry
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave a chip unrepaired
- Don’t leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Do you need bath re-enamelling in Binley?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
You may need us if you’ve spotted:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
What your quote should include
- What the guarantee covers, and for how long
- How the colour is matched
- How to care for the finish
- How the room is protected while they work
When we’d advise against a repair
Some jobs aren’t right for a repair, for example:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly before booking.
Materials we work on in Binley
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
About Binley
Binley is about 3 miles south-east of Coventry, in Coventry. Customers in Binley get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Binley is one of 88 towns and villages in Coventry where we work. Our jobs stretch from Binley to Birmingham (about 19 miles away).
We cover every part of CV3 and CV2 and the streets around it. That includes homes on Chard Road, Badger Road and Foxton Road and the roads around them. If you are just outside Binley, we cover Ernesford Grange (1 mile west), Willenhall (1 mile south-west), Stoke Aldermoor (1 mile west), Binley Woods (1 mile east) and Toll Bar End (1 mile south-west). We also work in nearby towns such as Coventry (3 miles north-west), Bishopsgate Green (3 miles north-west), Radford (3 miles north-west), Foleshill (3 miles north), Wood End (3 miles north) and Bell Green (3 miles north).
Local landmarks in Binley
We visit homes around The Cocked Hat Restaurant And Hotel, St Bartholomew's Church of England Academy and St Bartholomew's Church and the streets around them. Nearby too are Pattison College (1.5 miles north-west) and Ernesford Grange School & Community College (within half a mile west). Binley’s nearest station is Coventry station, about 2.7 miles west of the centre. Other landmarks nearby include Arena Park Shopping Centre (3.8 miles north-west) and University Hospital Coventry (1.8 miles north). Not far away are Brandon Marsh.
Repair or replace in Binley?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Why us?
- Most jobs done in one visit
- A year’s guarantee on all work
- Honest advice, even when it means no job
- We leave the room as we found it
Read our pricing or bath cost comparison.
Questions from Binley
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens next?
You will get a fixed quote back, typically with dates to choose from. You’re under no obligation.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Are there extra charges for Binley?
No. Our quotes include travel, with the same prices everywhere we work.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Binley. What changes the price is:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- The material and finish
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Quotes from your pictures
Phone pictures are fine. Just ensure we can see:
- Natural light rather than flash
- One sharp close-up of the damage
- The material, if you know it
- A coin beside the damage so we can judge size
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
What else we do in Binley
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
