Coventry · England
Bath Re-enamelling in Foleshill
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Foleshill. Free, fixed quotes from your photos.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
About our bath re-enamelling in Foleshill
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and people most often call us about enamel that’s lost its shine and feels rough and a coloured bath you want in white.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Foleshill (CV2, CV6)
- County
- Coventry
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
About Foleshill
Foleshill is about 2 miles north-east of Coventry, in Coventry. Wherever you are in the CV2 postcode area, we carry out the work at your property. We work in all 88 towns and villages in Coventry, from the larger towns to small villages. You can also see our page for Birmingham, about 18 miles away.
Postcode districts we cover here: CV2 and CV6. From Elgar Road, Hazel Road and Parry Road or anywhere nearby, we can come to you. Other places close to Foleshill include Bell Green (1 mile south-west), Henley Green (1 mile south-east), Wood End (1 mile north), Courthouse Green (1 mile south-west) and Alderman's Green (1 mile north-west). Further out, we also cover Ernesford Grange (3 miles south), Cheylesmore (3 miles south-west), Earlsdon (4 miles south-west), Binley (3 miles south), Spon End (3 miles south-west) and Coundon (3 miles west). Foleshill is among the bigger towns we cover in Coventry.
Near you in Foleshill
Typical jobs here are in homes near Henley College, Moat House Primary School and St Chad's Church, among other places. Foleshill’s nearest station is Coventry Arena station, roughly 1.5 miles north-west of the centre. Other landmarks nearby include Coventry Transport Museum (2.4 miles south-west) and Arena Park Shopping Centre (1.3 miles north-west). Not far away are Brandon Marsh.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Questions from Foleshill
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What happens after I send pictures?
You will get a fixed quote back, normally with dates to choose from. There is no obligation to book.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Foleshill.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What we are called out for in Foleshill
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Most people contact us when they notice one of these:
- Wear marks under the taps
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Stains that won’t shift
Comparing quotes
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- Aftercare advice
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Keeping it looking good
To keep it looking its best:
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What affects the price in Foleshill
Prices start from £350. We price every job individually. The main factors are:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Whether we combine several jobs
We charge the same wherever you are, so there is no premium for Foleshill. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- Something in shot to show the size
- One picture of the entire bath
- Whether it’s been repaired or coated before
If you’re in Foleshill and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Also near Foleshill
Also in Foleshill
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
- Open a window if you can
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why us?
- Generally one visit, start to finish
- A year’s guarantee on all work
- A fixed quote before booking
- Colours mixed by hand to suit your surface
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
