East Riding of Yorkshire · England
Bath Re-enamelling for Bishop Burton homes
Full bath re-enamelling and resurfacing in Bishop Burton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
Bath re-enamelling in Bishop Burton, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, we can help, on Victorian roll-tops, pressed steel baths and acrylic baths alike.
Big or small, you get the same one-year guarantee in Bishop Burton and across East Riding of Yorkshire.
- Area
- Bishop Burton (HU17)
- Region
- East Riding of Yorkshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
It helps to know what we can’t do too:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Places near Bishop Burton
Also in Bishop Burton
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Do not let dyes or oils sit on the finish
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About Bishop Burton
Bishop Burton is about 3 miles west of Beverley, in East Riding of Yorkshire. Wherever you are in the HU17 postcode area, a technician comes to you. Bishop Burton is one of 299 towns and villages in East Riding of Yorkshire where we work. Our jobs stretch from Bishop Burton to Leeds (about 43 miles away).
Our visits in HU17 work the same way as everywhere else we cover. Local streets include Cold Harbour View, Joby Lane and Pudding Gate, all of which we cover. We also travel to Cherry Burton (1 mile north), Walkington (2 miles south), Broadgate (2 miles south-east), Molescroft (2 miles east) and Beverley (3 miles east). Further out, we also cover Driffield (12 miles north), Pocklington (13 miles north-west), Hessle (8 miles south), Cottingham (5 miles south-east), Hornsea (14 miles east) and Market Weighton (7 miles west).
What’s near Bishop Burton
We visit homes around The Altisidora pub, Longcroft School and Sixth Form College and Church of All Saints, among other places. The closest station to Bishop Burton is Beverley station, roughly 3.1 miles east of the centre. Further afield, we also cover the area around The Beverley Treasure House (2.8 miles east) and Broadgate Hospital (2 miles south-east).
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before booking. We take into account:
- The colour and finish to match
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from photos
Two or three clear pictures are typically enough. It helps if you send:
- The material, if you know it
- Whether it’s been repaired or coated before
- A picture taken from further back
- Good light, ideally daylight, without flash glare
Send us pictures of the damage and one of the whole item, and tell us you’re in Bishop Burton, and we will come back with a fixed quote.
Repairing versus replacing in Bishop Burton
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before booking.
Why Bishop Burton customers choose us
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- Straight answers about what a repair can do
Take a look at our full price list or guide to resurfacing and replacement costs.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Keep a parking space free if you can
- Open a window if you can
- Mention any parking restrictions or tricky access
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
What we are called out for in Bishop Burton
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things customers typically mention when they call include:
- A roll-top that’s seen better days
- Wear marks under the taps
- A bath in a colour that no longer suits
- Several chips and rust patches
Questions to ask before booking
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- How the colour is matched
- How long it needs to cure
Your questions about bath re-enamelling in Bishop Burton
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you work in Bishop Burton?
Yes. We cover the whole UK and come to Bishop Burton. Send us pictures for a fixed quote, or call 0345 017 0787.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
