Stockton-on-Tees · England
Bath re-enamelling & resurfacing in Bishopsgarth, Stockton-on-Tees
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Bishopsgarth. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Bath re-enamelling in Bishopsgarth without replacing anything
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. Common call-outs are for chips and rust in more than one place and thin, worn enamel in places, across acrylic baths, pressed steel baths and Victorian roll-tops.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Area
- Bishopsgarth (TS19)
- County
- Stockton-on-Tees
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
What affects the price in Bishopsgarth
Resurfacing from £350. You will not pay by the hour. The price depends on:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Access to the area
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
We price nearly every job from photos. This is what we need:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- What it’s made of, if you know
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Where we work around Bishopsgarth
Bishopsgarth is about 1 mile west of Stockton-on-Tees, in Stockton-on-Tees. Across the TS19 area, a technician comes to you. Bishopsgarth is one of 31 towns and villages in Stockton-on-Tees where we work. You can also see our page for Newcastle upon Tyne, about 31 miles away.
Postcode districts we cover here: TS19. That includes homes on Leam Lane, Tyrone Road and Marske Lane. Nearby, we also work in Elm Tree Farm (1 mile south-east), Hardwick (1 mile north-east), Fairfield (1 mile south), Roseworth (1 mile north-east) and Stockton-on-Tees (1 mile east). We also work in nearby towns such as Billingham (4 miles north-east), Ingleby Barwick (4 miles south-east), Thornaby-on-Tees (3 miles south-east), Yarm (6 miles south), Egglescliffe (4 miles south) and Wynyard (4 miles north).
Around Bishopsgarth
Our customers here include homes close to Bishopsgarth School, Hardwick Green Primary Academy and St. Chad's Church, among other places. The nearest railway station is Stockton station, about 1.7 miles east. Well-known places in the area include Green Dragon Museum (2.1 miles south-east) and Yarm Castle (4.9 miles south).
Repairing versus replacing in Bishopsgarth
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. We charge the same wherever you are, so there is no premium for Bishopsgarth. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- We come to you, anywhere in the UK
- Rooms protected and left tidy
- A fixed quote before booking
- Colours mixed by hand to suit your surface
Take a look at our pricing and bath cost comparison.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Your questions about bath re-enamelling in Bishopsgarth
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What areas do you cover?
We cover the entire UK, including Bishopsgarth and the rest of Stockton-on-Tees. Send your postcode with your pictures and we’ll offer you dates.
What we do, step by step
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
Get a quote
If you’re in Bishopsgarth and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Landlords, agents and businesses in Bishopsgarth
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Towns and villages near Bishopsgarth
Other services in Bishopsgarth
About our accreditations · Every repair comes with a one-year guarantee.
