Stockton-on-Tees · England
Bath re-enamelling & resurfacing in Hardwick, Stockton-on-Tees
Our repair technicians come to Hardwick for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Worn patches where water runs and sits
Landlords, agents and businesses in Hardwick
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Bath re-enamelling at your home in Hardwick
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s thin, worn enamel in places and an old resurfacing that’s failing, we can normally put it right, on pressed steel baths, acrylic baths and basins & shower trays alike.
All our work comes with a one-year guarantee, wherever you are in Stockton-on-Tees.
- Location
- Hardwick (TS19)
- Area hub
- Stockton-on-Tees
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
So the finish stays in good condition for years:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Respect the curing time we give you
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How it works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
Get a quote
Email us pictures of the damage and one of the whole item, with your TS19 postcode, and we will come back with a fixed quote.
Related advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How easy the damage is to reach
- How hard the colour is to match
- The material and finish
- How many areas need work
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- A coin beside the damage so we can judge size
- The material, if you know it
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Most clients in Hardwick get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Common problems we fix in Hardwick
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is generally as strong as ever.
These are the problems we’re asked about most:
- Wear marks under the taps
- A coloured bath you want in white
- Several chips and rust patches
- A bath that stays dull however much you clean it
Before you book anyone
- What aftercare is recommended
- How the room is protected while they work
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
Covering Hardwick
Hardwick is about 1 mile north-west of Stockton-on-Tees, in Stockton-on-Tees. Jobs in Hardwick are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 31 places in Stockton-on-Tees. Our jobs stretch from Hardwick to Newcastle upon Tyne (30 miles away).
Jobs in TS19 work the same way as everywhere else we cover. You will find streets such as Poppy Lane, Cocken Road and Ketton Road, and we cover them all. Other places close to Hardwick include Bishopsgarth (1 mile south-west), Elm Tree Farm (1 mile south), Roseworth (1 mile north-east), Stockton-on-Tees (1 mile south-east) and Fairfield (1 mile south). We also work in nearby towns such as Billingham (3 miles north-east), Ingleby Barwick (5 miles south), Thornaby-on-Tees (3 miles south-east), Yarm (6 miles south), Egglescliffe (4 miles south) and Wynyard (4 miles north). Hardwick is among the bigger towns we cover in Stockton-on-Tees.
What’s near Hardwick
We visit homes around Harrow Gate Academy, Bishopsgarth School and The Grangefield Academy, among other places. The nearest railway station is Stockton station, roughly 1.5 miles south-east. A little further out are University Hospital of North Tees (less than half a mile north-east) and Green Dragon Museum (1.9 miles south-east).
Common questions in Hardwick
Which areas do you work in?
We cover the entire UK, including Hardwick and the rest of Stockton-on-Tees. Just include your postcode and we will offer you dates.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
How do I get a price for bath re-enamelling in Hardwick?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Also near Hardwick
More services for Hardwick
Honest limits
A few problems are outside what a surface repair can do:
- A bath that is rusted through
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Hardwick
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
