Devon · England
Bath re-enamelling & resurfacing in Blackpool, Devon
Local bath re-enamelling for Blackpool: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Chips and rust in more than one place
When a repair is not the answer
It helps to know what we can’t do:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Send us photos and we will tell you honestly before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Bath re-enamelling at your home in Blackpool
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, with the bath ready to use the following day. Whether it’s thin, worn enamel in places and an original cast iron bath that needs restoring, we can help, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Where
- Blackpool (TQ6)
- Region
- Devon
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Towns and villages near Blackpool
What else we do in Blackpool
Signs you need bath re-enamelling in Blackpool
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- A coloured bath you want in white
- Thin, worn enamel in places
- Stains that will not shift
- A dull, rough surface that will not come clean
What your quote should include
- Who turns up on the day
- Whether the price covers travel
- How your room will be protected
- How the colour is matched
Repairing versus replacing in Blackpool
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Blackpool. The job itself decides the price: the material, the amount of damage and how many items.
Why Blackpool customers choose us
- Colour mixed on the day to match
- No extra charge for your area
- One visit for most repairs
- Everything repaired in place
Read our pricing and bath cost comparison.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day. We leave the room clean.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
Get a quote
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from photos. These are the things that affect it:
- The material and finish
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Any details about the material
- Your postcode, so we can check dates
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Blackpool and the surrounding area
Blackpool is about 2 miles south-west of Dartmouth, in Devon. From the centre of Blackpool to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Blackpool is one of 586 towns and villages in Devon where we work.
Every address in TQ6 is within our area, from the main roads to the quietest streets. If you’re just outside Blackpool, we cover Strete (1 mile south-west), Blackawton (3 miles north-west), Dittisham (4 miles north), Allaleigh (4 miles north-west) and Cornworthy (5 miles north). Within a short drive, we also cover Newton Abbot (14 miles north), Ivybridge (14 miles west), Totnes (8 miles north-west), Kingsbridge (8 miles west), Highweek (15 miles north) and Kingskerswell (12 miles north).
What’s near Blackpool
Around Blackpool, we work in homes near The Green Dragon pub, Dartmouth Academy and Church of St Peter. Other landmarks nearby include Bayard's Cove Fort (2.5 miles north-east) and Britannia Museum (2.9 miles north-east). Not far away are Slapton Ley.
Blackpool: your questions answered
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How much does bath re-enamelling cost in Blackpool?
Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your TQ6 postcode.
Which areas do you work in?
We work UK-wide. Prices do not change with location.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
About our accreditations · Every repair comes with a one-year guarantee.
